2026-04-10Views：
Oil-free air compressor is not gas may have the following reasons:
blocked or damaged intake valve: If there is a problem with the intake valve, the compressor will not be able to suck in air, which will cause the air to be unable to compress. At this time, it is necessary to check whether there is a problem with the intake valve, and clean or replace it in time.
Exhaust filter blockage: The function of the exhaust filter is to filter pollutants in the compressed air. If the exhaust filter is clogged, it will prevent the compressor from discharging compressed air. Therefore, regular cleaning or replacement of the exhaust filter is the key to ensure its smooth flow.
Air filter clogging: long time not clean or replace the air filter will cause the air inlet resistance to increase, so that the pressure is insufficient, can not meet the normal pressure requirements. At this time, the filter element needs to be cleaned or replaced to restore air flow.
Compression screw damage: For oil-free screw air compressors, if the compression screw is damaged or worn, the air cannot be compressed to sufficient pressure. In this case, the compression screw needs to be replaced with a new one.
Motor or circuit failure: The abnormal motor or circuit failure of the oil-free air compressor will also cause the equipment to fail to work normally, thereby affecting the compression and discharge of gas.
PLC failure or solenoid valve problem: If the PLC fails or the solenoid valve (including its circuit, valve body and pipeline) has a problem, it may cause the air intake machine to not operate, thereby affecting the air compressor.
Small pressure check valve failure: When the small pressure check valve fails, even if the pressure in the machine is high, there may be no pressure output, which is also a possible cause of not getting gas.
In order to solve the problem that the oil-free air compressor does not breathe, it is recommended to check the above-mentioned components first, find out the fault point, and repair or replace it in time. If the problem cannot be solved by itself, it is recommended to contact professional air compressor maintenance personnel or the technical support team of the equipment manufacturer for further inspection and maintenance.
Air compressor PM may refer to two meanings here, depending on the context: PM as an abbreviation for permanent magnet frequency conversion: In this case, PM stands for air compressor using permanent magnet synchronous motor and frequency conversion control technology. This technology can improve the air compressor can
When the content of water in the air is expressed in ppm (parts per million), it is not a fixed value, but is affected by many factors such as temperature, humidity, geographical location and climatic conditions. It is usually several hundred to several thousand at normal temperature and pressure. Between ppm. specify the influencing factors in the air
Oil-free screw air compressor is not really oil-free, but its oil content is very low, can reach 0.01ppm or less. This air compressor uses special coatings or materials to reduce or eliminate the parts that need lubricating oil, so that oil pollution is not generated during the compression process
In wafer manufacturing, compressed air plays a vital role, its role runs through a number of key process links, as follows: 1. drive precision mechanical movement, to ensure lithography accuracy In the lithography machine, compressed air drives the cylinder and pneumatic motor, to achieve the shutter control mechanism.
Brand Granklin Brand advantage stable and durable service industry big brand cooling method water cooling/air cooling Type Integrated Company Name Shanghai Granklin (Group) Co., Ltd. Transmission Mode
The air compressor itself is not a pressure vessel, but it is part of a pressure vessel system. The air compressor is responsible for compressing the air and sending it into the air storage tank. The air storage tank belongs to the category of pressure vessel because it is used to store compressed air and release it when needed. Shanghai Haige
Open the drain valve of the air compressor, you can follow the following steps: Turn off the power 1. preparations: Before performing any maintenance operations, first make sure that the air compressor has been turned off and the power supply is cut off to prevent accidental startup and the risk of electric shock. Prepare the tool:
There is a close relationship between the "kilograms" of the air compressor and the displacement. Here, "kilograms" usually refers to the pressure output capacity of the air compressor, that is, the pressure of the compressed air it can produce, and the displacement is
First of all, let's briefly understand the oil-free scroll air compressor. The scroll air compressor is the latest type of air compressor developed in the past two decades. Compared with traditional air compressors, it has a novel structure, small size and weight. Light, low noise, life
Q: Screw air compressor are frequency conversion? A: No. The water-lubricated oil-free screw air compressor produced by Shanghai Granklin Group has three series: 1. Power frequency air compressor (referring to the use of ordinary motors and ordinary controllers). 2. Frequency conversion
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
