2026-04-13Views：
As an efficient and environmentally friendly equipment, oil-free air compressor has been widely used in many industries. Its core lubrication technology is the key to achieve efficient and stable operation. Taking the water-lubricated screw air compressor produced by the Glanclin Group as an example, we will discuss its unique lubrication method in depth.
Water lubrication is an important lubrication technology for oil-free air compressors. The water-lubricated screw air compressor of Shanghai Granklin Group uses pure water as the lubricating medium, replacing the traditional lubricating oil. This lubrication method not only realizes the lubrication, cooling, sealing and noise reduction of the compressor, but also ensures the purity of the compressed air and meets the requirements of environmental protection. Through the flow of water, the comprehensive lubrication of the compressor is realized, which effectively reduces the friction and wear between components and prolongs the service life of the equipment.
In addition, Granklin Group's water-lubricated screw air compressor also has advanced functions such as intelligent frequency conversion control and constant pressure control, which further improves the energy efficiency and operational stability of the equipment. The combination of its unique lubrication system and intelligent control system enables the air compressor to automatically adjust during operation, reduce ineffective energy consumption, and achieve high efficiency and energy saving.
In general, the water-lubricated screw air compressor produced by Shanghai Granklin Group has achieved efficient and stable operation under oil-free conditions through advanced water lubrication technology. This lubrication method not only ensures the purity of the compressed air, but also reduces the maintenance cost of the equipment, improves the operating efficiency, and provides a reliable compressed air solution for many industries.
In the purging link after photoresist development, the selection of nitrogen pressure should be determined comprehensively in combination with process requirements and cleanliness requirements. The typical pressure range is 0.1~0.8 MPa. The specific analysis is as follows: 1. core process requirements drive pressure range Conventional development purging majority lithography
The air source pressure at the chemical site varies according to specific application scenarios and process requirements. The common pressure range covers low to medium pressure, specifically including instrument air pressure (0.4-0.7MPa), common industrial compressed air pressure (0.6-1.0MPa), and chemical steam pressure level (low pressure ≤
Q: semiconductor industry with oil-free air compressor? A: semiconductor process more, the use of compressed air is inevitable. Oil-free air compressor can look at the water-lubricated oil-free air compressor of Shanghai Granklin Group. The compressed gas does not contain oil and is suitable for semi-conductive
A pressure of 13kg can be converted to 1.3MPa (megapascals). Since the pressure of 1kg is equal to 0.1MPa, the pressure of 13kg is equal to 13 x 0.1MPa = 1.3MPa. In physics, pressure refers to the vertical force on a unit area, using the formula P = F/S table
The power of the 6 cubic air compressor is not fixed, it will vary according to the specific design and application requirements. In general, the power of the 6 cubic air compressor may be around 37 kW, which is a common power specification provided by many manufacturers. However, it is also possible
The calculation of equipment gas consumption (converted into cubic meters) should be combined with equipment parameters, operation time and gas state (such as pressure and temperature). The following are detailed steps and examples: 1. the core formula Volume flow calculation If the equipment is known to be in the standard state (0°C,1 atm)
Compressed air is widely used in the medical field, and it plays an important auxiliary role in the treatment and rehabilitation of patients. The following are some common medical uses: Respiratory support: Compressed air is used as a power source for ventilators to help patients breathe
In the process of air compressor operation, it is very important to ensure safety. The following are the key safety points during the operation of the air compressor and the prohibited items that must be strictly observed to ensure the safety of the operators and the normal operation of the equipment: safety points Professional training: operators
In the construction industry, air compressors (air compressors) play a vital role, mainly in the following aspects: Provide power source: Air compressors are the main source of power for many pneumatic tools on construction sites. For example, tools such as pneumatic hammers, pneumatic drills, pneumatic wrenches, etc.
The chip manufacturing process does require the use of air compressors. Air compressors are widely used in industrial production to provide compressed air, which plays an important role in a variety of processes. In chip manufacturing, compressed air may be used to drive pneumatic
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
