2026-04-10Views：
The service life of the water-lubricated screw machine will be affected by many factors, but in general, its design service life is relatively long. The following is a few analysis of the service life of water lubricated screw machine:
core configuration and quality assurance: Water-lubricated screw machines usually use high-quality core configurations, such as the new generation of stainless steel water-lubricated original mainframe and high-quality bearings. These configurations can ensure that the machine runs continuously for 24 hours at high efficiency and low temperature, thereby ensuring the mainframe The service life is up to 100000 hours.
Routine maintenance and maintenance: The service life of the water-lubricated screw machine is also affected by the maintenance situation. Routine maintenance includes replacing the air filter element and the water filter element. The air filter element is replaced every 500-2000 hours according to different environmental conditions, and the water filter element is replaced every 2000-4000 hours. These maintenance measures help to keep the machine in good condition, thereby extending its service life.
Use environment and frequency: the use environment and frequency of the machine will also have an impact on its service life. Use in humid, hot or dusty environments may accelerate wear and corrosion of the machine. Similarly, frequent use will increase the load and wear of the machine. Therefore, a reasonable use environment and moderate use frequency help to extend the service life of the water-lubricated screw machine.
Professional maintenance and regular inspection: In addition to regular maintenance, professional maintenance and regular inspection are also the key to ensuring the long life of the water-lubricated screw machine. This includes checking the oil level and quality, cleaning and replacing filters, checking coolers and motors, etc. These maintenance measures can identify and solve potential problems in time, thereby extending the life of the machine.
In summary, the service life of the water-lubricated screw machine is affected by many factors, such as core configuration, maintenance, use environment and frequency, professional maintenance and regular inspection. Under reasonable use and maintenance, its service life can reach a long time. However, the specific service life needs to be evaluated according to the actual situation.
Nowadays, oil-free air compressors are favored by many consumers. Among them, oil-free air compressors have many unique characteristics and benefits. In fact, the oil-free air compressors generally do not contain any oil. What is really oil-free is all oil-free air compressors, which are lubricated by resin materials.
Whether the air compressor room needs to be explosion-proof should be judged according to whether there is flammable gas or dust in the environment where it is located. If the air compressor room is located in the presence of combustible gas (such as gas, liquefied petroleum gas, etc.) or dust (such as metal dust, coal dust, etc.)
Can boot operation, can not rule out the problem is the motor. Host imbalance mainly includes: unbalanced power supply, large fluctuation of power supply, poor contact of a certain phase of contactor, and three-phase imbalance caused by motor problems. The final reason can only be known through investigation one by one.
The rated pressure of the air compressor refers to the maximum pressure value that the air compressor can withstand under normal working conditions. When the rated pressure of the air compressor is 8bar, the minimum operating pressure is not a fixed value, but will be affected by many factors.
The pressure of plant air compression is usually determined according to the specific application needs and equipment requirements. The following is a summary of some common ranges and considerations for factory air compression pressure: Common pressure ranges: Generally speaking, compressed air in factories
Compressed air quality standards mainly include the following aspects: Humidity: The humidity of compressed air is usually required to be less than 50%. Excessive humidity may cause equipment corrosion or affect other process requirements. Oil content: in ordinary air compressor, compressed air
Definition of oil content of oil-free air compressor and analysis of oil-free characteristics of Shanghai granklin water lubricated air compressor 1. definition of oil content of oil-free air compressor in the air compressor industry, oil-free air compressor means that lubricating oil is not used in its compression process for lubrication and
The maintenance cycle of air compressors varies depending on factors such as equipment type, use environment and workload. In order to ensure the normal operation of the air compressor and extend its service life, it is recommended to refer to the following maintenance cycle: Routine maintenance items: clean the air filter element, replace
Air compressor in the use of the process involves a wide range of safety issues, these issues are not only related to the stable operation of the equipment itself, but also directly affect the safety and health of the operator. The following is a detailed analysis of the safety problems of air compressors: 1. the safety hazards of the equipment itself
The national standard of screw air compressor is like a set of code of conduct tailored for the "model worker" of the industry. This set of guidelines not only ensures the safety, reliability and efficiency of screw air compressors, but also leads the entire industry to more
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
