2026-04-09Views：
It is best to drain water every day, because the moisture in the air during the working process of the air compressor will enter the air storage tank and then go to the dryer. The dryer has an electromagnetic drain that will automatically drain water, while the air storage tank generally has only one ball valve below. If water is not drained, the inside of the air storage tank will corrode and rust, resulting in shortened service life.
Just like dumping garbage every day, it is OK to dump garbage once less than 2 days.
If the air compressor is equipped with a gas-water separator, it will automatically drain water. The main thing to pay attention to is to check whether it is blocked.
In addition, the gas tank is required to drain regularly every day, or add an automatic drain, but also regularly check whether it is blocked.
Q: Air compressor and cold dryer shutdown sequence? Answer: Under normal circumstances is to open the cold dryer, and then open the air compressor. When shutting down, the air compressor is turned off first, and then the cold dryer is turned off. If the order is wrong, try not to have it in industries with high gas requirements. If the order is wrong, it will be empty.
The pressure of the general factory gas source is not a fixed value, but is determined according to the specific application scenario, equipment specifications and production process requirements. The following are some common air supply pressure ranges and their related instructions: 1. common air supply and its pressure range
When it comes to oil-free screw air compressors, Shanghai Granklin Group Co., Ltd. is undoubtedly a worthy of attention. The company focuses on the R & D and production of air compressors. As one of its important products, oil-free screw air compressors are well recognized by the market.
There is no fixed standard answer to the rotation cycle of the air compressor, because it depends on a variety of factors, including the type of air compressor, specifications, conditions of use, maintenance status and the actual needs of the enterprise. Generally, & l
Compressor adopts the core purpose of oil-free lubrication and Granklin technical advantages Compressor as a key equipment in industrial production, its lubrication method directly affects the quality of compressed air and application scenarios. Granklin air compressor adopts water lubricated single screw technology to innovate
The essence of the 500-hour initial guarantee is to do a thorough cleaning before the impurities have caused great damage and the oil has not completely deteriorated, so as to clear away the hidden dangers and enable the back of the machine to run stably for a long time.
Compressed air system plays a core supporting role in industrial production. Its importance is reflected in ensuring production continuity, improving efficiency and quality, reducing operating costs, enhancing safety and environmental protection, and adapting to diversified production needs. The following is a
Compressed air oil content refers to the mass concentration of oil in compressed air. Generally speaking, the oil content in compressed air should be controlled within a certain range to ensure air quality and safe use. Standard content: Generally, the oil content standard in compressed air is 5m
Industry production, construction sites and other gas points, gas fluctuations in the scene. The original single gas storage tank volume is insufficient, do not want to stop production to replace the expansion and transformation of the large tank scene. Production conditions that require high continuity of gas supply and require redundant backup.
There are many ways to remove water from air compressors. The following are some common and effective methods: Manual drainage: In some simple air compressors, preliminary water removal operations can be carried out manually at the exhaust port. The specific method is to compress the air
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
