2026-04-09Views：
The pressure requirements of the plant air compressor depend on the specific application scenario and process requirements. Generally speaking, the pressure unit of the air compressor is expressed in "bar" or "megapascal (MPa)", but sometimes it is also described in "kilogram force/square centimeter (kgf/cm²). It should be noted that the "kilogram" here refers to the unit of pressure, not the unit of weight.
The common plant compressor pressure range may be between 5-13 bar (approximately equal to 0.5-1.3 MPa or 50-130 kgf/cm²), but this is only a rough estimate. In practice, different process flows may require higher pressures or lower pressures. For example, some light industrial applications may only require lower pressures, while heavy industrial or special processes may require higher pressures.
The water-lubricated oil-free variable frequency screw air compressor of Shanghai Granklin Group can provide equipment with different pressure ranges according to customer needs. These air compressors use advanced water lubrication technology and can operate without lubricating oil, thereby providing pure compressed air. At the same time, the frequency conversion technology enables the air compressor to automatically adjust the operating speed according to the actual demand to achieve high efficiency and energy saving.
If you are considering purchasing an air compressor, it is recommended that you first determine the pressure range required for your process needs, and then contact Shanghai Grankering Group or other air compressor suppliers to obtain more specific equipment specifications and performance parameters. In addition, the professional air compressor sales and service team can also provide you with customized solutions and technical support.
The compressed air used in hospitals mainly comes from professional air compression equipment, among which Granklin water lubricated screw air compressor is a typical equipment that meets the needs of the medical industry. Its working principle and advantages are as follows: working principle granklin water lubrication screw air
Question: How long does the water-lubricated oil-free air compressor generally need to replace the filter element? Answer: The filter element replacement cycle of the water-lubricated oil-free air compressor is generally about 3000 hours. The filter element is an important part of the air compressor, which can effectively filter out various impurities and avoid
Use, blow dry after the final water washing, use air compressor, as well as instruments, pneumatic tools, coating generally regular point of the factory are required. The air compressor is used in the electroplating factory: 1, blowing sand before plating 2, blowing air to remove water after plating 3, and spraying the product after electroplating
The variable frequency air compressor realizes efficient gas consumption through intelligent adjustment technology. Its core principle is to dynamically adjust the operating state according to the actual gas demand to avoid energy waste and ensure the stability of the system. Traditional air compressors usually run at a fixed speed.
Regarding the frequency of air compressor oil replacement, this is a problem involving multiple factors, including the type of air compressor, the use environment, the workload, and the manufacturer's recommendations. Generally speaking, in order to ensure the normal operation of the air compressor and extend its service life, regular replacement
When the air compressor cannot be started again after the air compressor is stopped, it may be caused by various reasons. The following are some common reasons and corresponding solutions: Power problem: Check whether the power supply is normal, and confirm the air pressure
CNC lathes usually need to be equipped with air compressors. Air compressors play a vital role in the operation of CNC lathes, which are mainly reflected in the following aspects: 1. the role of air compressors in CNC lathes to drive pneumatic components: CNC lathes
Air compressor does not belong to special equipment. Special equipment refers to boilers, pressure vessels (including gas cylinders, the same below), pressure pipes, elevators, lifting machinery, passenger ropeways, large amusement facilities and special machines in the field (factory) that involve life safety and are more dangerous.
Compressed air grade requirements for direct contact with food and analysis of the suitability of Granklin air compressor 1. Compressed air core requirements for direct contact with food Compressed air in direct contact with food (e. g. beverage filling, food packaging, material handling, etc.) needs to meet strict health requirements.
There is no clear answer to which air compressor is more durable without oil or oil, because it depends on many factors, such as material quality, manufacturing process, use environment and maintenance. Advantages of oil-free air compressors: Since no lubricating oil is used
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
