2026-04-10Views：
The exhaust temperature of a water-lubricated oil-free machine is affected by many factors, including the efficiency of the cooling system, the ambient temperature, and the workload of the machine. Under normal circumstances, the exhaust temperature of water-lubricated oil-free machine is not higher than 65 ℃. This temperature range is obtained under the conditions of normal operation of the machine, normal operation of the cooling system and moderate ambient temperature.
If the exhaust temperature is higher than this range, it may be caused by the following reasons:
the cooling system is blocked or inefficient, resulting in a decrease in the cooling effect of the air compressor and an increase in the exhaust temperature.
Temperature sensor failure, the air compressor internal temperature judgment error, may lead to high temperature alarm.
High ambient temperature or poor operating environment of the air compressor may also cause the exhaust temperature to rise.
Therefore, in order to maintain the normal operation of the water-lubricated oil-free machine and extend its service life, the cooling system should be checked regularly and kept clean, while paying attention to the impact of ambient temperature on the machine. If the exhaust temperature is found to be too high, check and deal with related problems in time.
Please note that the above information is for reference only. The specific exhaust temperature may vary depending on the machine model, manufacturer and specific conditions of use. In practical applications, you should refer to the user manual of the machine or consult the manufacturer for the most accurate information.
In the air compressor system, the starting sequence of the air compressor and the cold dryer is very important. Usually, it is recommended to open the air compressor first, and then open the cold dryer. The reason is that the air compressor is responsible for providing compressed air, while the cold dryer is used to remove moisture and
The size of the compressor required for a small plant depends on a number of factors, including the specific needs of the plant, the scale of production, the process and the budget. Here are some suggestions to help you determine the air compressor size suitable for small factories: Determine the demand: evaluate
Whether the air compressor (air compressor) needs water during the working process depends on its type and cooling method. The following is a specific analysis: the 1. needs water: water-cooled air compressor water-cooled air compressor through circulating cooling water to take away the heat generated in the compression process, indeed
When protecting the work area where the air compressor is placed, we can take a series of measures to ensure the safety of personnel and equipment. First of all, choose a flat, stable and spacious placement position for the air compressor to ensure its stable operation and reduce the impact of vibration or tilt.
The maintenance cycle of the variable frequency air compressor is usually determined according to a number of factors, including the frequency of use of the equipment, the working environment, the operating time, and the specific maintenance manual or manufacturer's recommendations. The following is a general maintenance cycle guide: 1. Daily Maintenance
The permanent magnet variable frequency air compressor is a high-efficiency and energy-saving air compressor, which has the following advantages: high-efficiency and energy-saving: using permanent magnet motor and frequency converter control, the operating speed of the compressor can be adjusted according to actual needs, thereby saving electricity. Stable and reliable: due to the use of permanent
Recommend the use of water-lubricated single screw technology of medical oil-free air compressor. This kind of equipment realizes the sealing and lubrication between the rotor and the star wheel through the water medium, completely avoids the lubricating oil from participating in the compression process, eliminates the risk of oil pollution from the root, and ensures the output compression air.
The main reasons for the use of compressed air in fermenters include the following: Oxygen transfer: During fermentation, microorganisms need oxygen for metabolic activities, especially in aerobic fermentation. By injecting compressed air into the fermentation tank, oxygen can be effectively transferred
The gas production of a compressor in one minute varies with various factors such as model, power, design, manufacturing process, working environment and application requirements. The following are some specific analysis and induction of compressor gas production: 1. compressor type and gas production household small
How to deal with a lot of water from the air compressor? Hello! 1. Add a freeze dryer. Also, if the air cooler of your machine is too small, look at the temperature of the actual air compressor exhaust port (not the temperature on the panel is actually the uncooled temperature, but the machine
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
