2026-04-10Views：
In today's market, oil-free air compressors and oil-free air compressors have their own "fans". Which one to choose is really a bit like choosing your own taste preferences, some people like sweet, some people like salty.
Oil-free air compressors, like those who pursue a healthy diet, are "clean" and "pure". Because there is no "doping" of oil, the compressed air they provide is like carefully filtered clean water, which is extremely pure, especially suitable for those who have strict requirements on air quality, such as friends in the food and medical industries.
And there are oil air compressors, they are more like those traditional delicacies, although they contain a certain amount of oil, but also have a unique "flavor". They run more smoothly because the oil plays a lubricating role in them. It's like adding the right amount of oil to your cooking to make your food taste better. Moreover, oil compressors are more common in continuous high-intensity work or large industrial facilities because they can "withstand" more "pressure".
Therefore, when buying an air compressor, choose an oil-free or oil-free one. It really depends on your "taste" and demand. If you are pursuing purity and cleanliness, then oil-free air compressor may be your first choice; and if you pay more attention to operating efficiency and carrying capacity, then oil compressor is also a good choice. Of course, no matter which one you choose, you must remember to maintain and maintain it regularly, so that they can serve you better!
The advantages of oil-free water-lubricated screw air compressors mainly include: low cost of use: this type of air compressor uses water as the compression and sealing medium, replacing traditional lubricating oil, thereby reducing the cost of use. Compressed air is pure: through advanced sealing
The air quality standard of the oil-free screw air compressor outlet is mainly concerned with the oil content in the compressed air. Generally, in the outlet air quality standard of oil-free screw air compressor, the oil content is controlled at a very low level, generally at 0.01ppm (one part per million) or
There may be many reasons for the slow air intake of screw air compressors. The following are some common reasons and corresponding solutions: 1. common reasons The air filter is blocked. The air filter may accumulate a large amount of dust and impurities after long-term use. Hindering the normal entry of air
Q: Air compressor always has water in the air pipe? Answer: Please check whether the cold dryer or suction dryer is working normally, and whether the automatic drain of the gas tank is blocked. Whether the air-water separation device of the air compressor fails, first look for the reason from the above points. If you still can't do it, you need it.
There are significant differences between oil-injected air compressors and oil-free air compressors in many key aspects. The following is a detailed comparison of these two air compressors: 1. operation principle Oil-injected air compressor: During operation, lubricating oil is Spray into the compression chamber to lubricate, seal and
The oil content of the general air compressor will vary according to different types and application scenarios. The following are some specific oil content standards: For ordinary air compressors, the national standard stipulates that the liquid oil content in compressed air shall not exceed 5 mg/m & sup3;, pressure
When exploring which permanent magnet variable frequency compressor is good, Shanghai granklin group has undoubtedly become a leader in the industry with its excellent water lubricated screw air compressor products. The group specializes in the production of oil-free water lubrication air compressors, with rich production experience and advanced
The choice of air compressor with oil or without oil depends mainly on the specific use needs and environment. Oil compressors require lubricating oil during operation, which may cause pollution in some environments. However, they usually have high durability and low cost
If there is a large number of air blowing and cooling processes in your processing, the air consumption will be obviously too large. It is suggested to directly match the air volume according to 8 cubic meters per minute or even higher. It is better to match the air pressure instead of being too small, so as not to report to the police and stop the machine when working, which will affect the production.
During the operation of the air compressor, the temperature of the air is increased due to the compression of the air, and the water vapor content in the air increases. When compressed air is cooled, water vapor condenses into liquid water, which is the main source of moisture in compressed air. If you do not deal with this moisture in a timely manner
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
