2026-04-10Views：
In wafer manufacturing, compressed air plays a vital role, its role runs through a number of key process links, as follows: 1. drive precision mechanical movement, to ensure lithography accuracy In the lithography machine, compressed air drives the cylinder and pneumatic motor, to achieve the shutter control mechanism.
When starting the air compression system, there are different views and practical methods on whether to turn on the dryer or the air compressor first. This mainly depends on the type of dryer used and the specific configuration of the air compression system. General conditions for freeze drying
Air compressor export oil content standards are usually formulated by the International Organization for Standardization (ISO) or related industry associations. For example, ISO 8573-1 is an important standard for oil content testing of air compressors, which specifies three levels of oil content: oil content ≤ 0.01 mg/m &
Nitrogen is widely used in the electronics industry, mainly as a protective gas, clean gas and process gas, and its purity usually needs to reach more than 99.999 percent to meet the stringent requirements of the electronics industry for product quality. The following is the specific application of nitrogen in the electronics industry and
In the field of highly precise semiconductor testing, compressed air is not only an important power source for the operation of the production line, but also a key factor to ensure test accuracy and product yield. For the semiconductor tester, the quality, dryness, cleanliness and pressure of the compressed air
The cold dryer (also known as the freeze dryer) is mainly used to remove the moisture in the compressed air. Its working principle is to use refrigeration technology to reduce the temperature of the compressed air, so that the water vapor in the compressed air is condensed into water droplets and passed through the drainage system. Discharge it. About
Single screw water lubricated air compressor does not require refueling. This air compressor adopts oil-free water lubrication technology, and its lubrication and cooling medium is water instead of traditional lubricating oil. The following is a detailed explanation of the single screw water lubricated air compressor that does not need refueling: 1. working principle
The requirements of automation equipment for compressed air mainly involve pressure, flow, cleanliness and dryness to ensure the normal operation of the equipment and extend its service life. The following are the specific requirements of automation equipment for compressed air: pressure stability: automation
The correct maintenance cycle of the screw air compressor needs to be determined comprehensively according to multiple factors to ensure the long-term stable operation and efficient performance of the equipment. The following is a rigorous analysis of the screw air compressor maintenance cycle: 1. basic maintenance cycle Generally speaking, the basis of screw air compressor
Oil injection screw compressor exhaust oil requirement standard is an important technical index, it is directly related to the purity of compressed air and subsequent use effect. The following is a detailed analysis of the standard: 1. standard range Generally speaking, the exhaust of oil-injected screw compressors
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
