2026-04-10Views：
The discharge oil content of screw compressors is usually expressed in ppm(parts per million, parts per million). This is a concentration unit used to describe the proportion of oil in the gas discharged from the compressor. The smaller the ppm value, the lower the oil content in the gas.
In the screw compressor, due to the working principle of the compressor and the use of lubricating oil, the discharged gas may contain a certain amount of oil. These oils may have an impact on subsequent equipment or processes, especially in applications where high purity gas is required.
In order to reduce the oil content in the exhaust gas, some measures can be taken, such as the use of efficient oil and gas separators, regular replacement of lubricating oil and filter elements, and adjustment of compressor operating parameters.
It should be noted that the ppm value is only a relatively fixed standard, and the actual oil content may vary due to factors such as the compressor model, working conditions, and use time. Therefore, when using screw compressors, it is recommended to regularly check the oil content in the exhaust gas to ensure that it meets relevant standards or process requirements.
In addition, different industries and applications may have different requirements for exhaust gas oil content. Lower ppm values may be required in certain situations where gas purity is required, such as food processing and medical industries. Therefore, when choosing a screw compressor, the appropriate model and configuration should be selected according to the specific application requirements and standards.
Compressed air needs to meet a series of strict standards in terms of food grade requirements to ensure food safety and hygiene. The following is a detailed summary of the food grade requirements of compressed air: 1. purity requirements compressed air must be oil-free, no
Due to the large and small parts of the air compressor, the common ones are: air filter, oil filter, oil core, lubricating oil, belt, solenoid valve, etc.; air compressor maintenance is divided into: overhaul and minor repair. Under normal circumstances, the overhaul of air compressors is basically a serious problem.
Answer: The maintenance of the screw air compressor can be used for more than 10 years, the life of the air compressor depends on the use of the environment, maintenance and so on. "Water-lubricated oil-free snail produced by Shanghai Granklin (Group)
The main difference between variable frequency air compressor and non-variable frequency air compressor is reflected in the working principle, energy consumption and operating characteristics. The following is a specific comparative analysis: working principle non-variable frequency air compressor: adjust the gas output by starting or stopping the compressor
The maintenance cycle of the air compressor mainly depends on its frequency of use, working environment and the model and quality of the air compressor. In order to ensure the normal operation of the air compressor and prolong the service life, regular maintenance is very necessary. The following are some general maintenance intervals
The fire control standards of air compressor room shall be formulated in combination with fire risk, fire facilities configuration, management measures and regulatory requirements. The following is a detailed explanation for you from four dimensions: 1. fire risk control core risk points: high temperature and oil pollution: during the operation of the air compressor
General air compressor pressure is how much depends on its type, specifications and the use of the environment. The following are some common air compressor pressure ranges: Low pressure air compressor: The working pressure is usually between 0.7 and 1.2 MPa (MPa), that is, 7 to 12 bar. Medium pressure
High-pressure screw air compressor is widely used in various industries and fields that require high-pressure air sources because of its high efficiency, stability and adaptability. The following are some suitable for the use of high-pressure screw air compressor industry: 1 energy industry oil, natural gas exploitation: in the oil,
Nitrogen is widely used in the electronics industry, mainly as a protective gas, clean gas and process gas, and its purity usually needs to reach more than 99.999 percent to meet the stringent requirements of the electronics industry for product quality. The following is the specific application of nitrogen in the electronics industry and
The air blown by the air compressor can be divided into oil and oil-free. The main difference between them is the oil content in the compressed air. During the compression process of the oil air compressor, the lubricating oil will be in direct contact with the air, so the compressed air will contain a certain amount
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
