2026-04-10Views：
The air blown by the air compressor can be divided into oil and oil-free. The main difference between them is the oil content in the compressed air.
During the compression process of the oil air compressor, the lubricating oil will be in direct contact with the air, so the compressed air will contain a certain amount of oil. These oil components may exist in the form of oil mist or oil droplets, which have a certain impact on the quality of compressed air. Especially in some applications with high air quality requirements, such as food, medicine, electronics and other industries, the oil-containing gas blown by the oil air compressor may not meet the production requirements.
Oil-free air compressor adopts a special lubrication method, so that the lubricating oil will not directly contact with the compressed air, thus greatly reducing the possibility of oil entering the compressed air. Therefore, the oil-free air compressor blowing gas oil content is low, but not completely free of oil, its oil content is affected by the region, air quality, air compressor room environment, compressor cleanliness and other factors. However, compared to oil-free air compressors, oil-free air compressors are more suitable for applications with higher air quality requirements.
In addition to the difference in air quality, oil and oil-free air compressors also have certain differences in structure, performance and maintenance. For example, oil-free air compressors usually require the use of higher-level seals and bearings and other components to ensure that there is no leakage of lubricating oil during the compression process; while oil-free air compressors require regular replacement of lubricating oil and oil filters and other components. Maintain its normal operation and extend its service life.
Therefore, when choosing an air compressor, it is necessary to choose a suitable oil or oil-free air compressor according to the specific application and requirements. If the air quality requirements are high, it is recommended to choose an oil-free air compressor; if the air quality requirements are not high, and you want to reduce costs and maintenance workload, you can choose an oil-free air compressor.
Air compressor is a large energy consumer in the factory, ordinary air compressor can not achieve environmental protection and energy saving, for the national promotion of energy saving and environmental protection, is any air compressor production enterprises must meet the rigid requirements. So, energy-saving oil-free air compressor manufacturers which is good?
View detailsIn the highly sophisticated chip packaging industry, compressed air is not only an important power source for production line operation, but also a key factor to ensure packaging quality and product yield. The quality of compressed air, including its dryness, cleanliness and pressure stability, is directly related to the chip
The start-up process of the air compressor usually includes the preparation before starting, the start-up operation and the inspection after starting. At the same time, some key matters need to be paid attention to to ensure the normal operation and safe use of the air compressor. The following are the detailed boot process and precautions: 1.
空气压缩机的工作压力范围因应用场景、设备类型及行业需求而异，通常以兆帕（MPa）为单位，工程中常简化为“公斤”（1公斤≈0.1MPa）。以下是其核心标准与应用场景的详
The advantages of power frequency air compressor mainly include: cheap price and low investment cost. Easy maintenance, no need for additional maintenance and adjustment of equipment. However, the power frequency air compressor also has some shortcomings: energy consumption is large, not energy saving. Pressure of compressed air
The compressed air of 0.6MPa is not absolutely safe in the production process, and its safety depends on the specific use scenario, equipment condition, operation specification and whether the protective measures are in place. The following is a detailed analysis of its safety: the risk of compressed air itself pressure wind
The main reasons for the use of air compression in pharmaceutical factories are as follows: 1. ensure the quality of drug production, direct contact with drugs: in the process of drug production, air compression is widely used in many aspects, such as drug packaging, drying, purging and so on. In these links, the compressed empty
Oil-free air compressor is designed and theoretically, its gas should not contain oil, because it does not use oil in the process of compressing air. However, in practical applications, the possibility of gas containing oil exists, which is mainly affected by some external factors and operation and maintenance conditions.
The normal pressure range of air compressors varies with different applications and needs. Generally speaking, the pressure range of industrial air compressors is usually between 5-13 bar (that is, 500-1300 kPa or 72.5-188.5 psi). However, this is only a rough range, real
The air compressor belongs to the general mechanical type. The air compressor (English: air compressor) is the main body of the air source device. It is a device that converts the mechanical energy of the prime mover (usually an electric motor) into gas pressure energy.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
