2026-04-10Views：
In the highly sophisticated field of chip packaging, compressed air is an indispensable role! However, the compressed air here is not of any quality, especially for its oil content, which has strict requirements!
Imagine that if the oil content in the compressed air is too high, those tiny oil molecules are like "little troublemakers", sneaking into the chip packaging process, bringing unnecessary trouble to the original precision process. They may be attached to the surface of the chip, affecting the performance and stability of the chip, and may even cause the package to fail!
Therefore, in the field of chip packaging, we usually require the oil content of compressed air to be as low as possible, and it is best to achieve the standard that the total oil content is less than 1ppm. In this way, those "little troublemakers" have nowhere to hide, and the process of chip packaging can be carried out more smoothly and stably!
Of course, in order to achieve such high air quality standards, we need to carefully select and maintain compressed air systems to ensure that they can continuously and consistently provide high-quality compressed air. In this way, our chip packaging process can be more exciting and possible for the world of science and technology!
In the factory, the choice of suitable pipe to transport compressed air is very important, because it is directly related to the efficiency, safety and maintenance of the system. The following is an evaluation of several commonly used pipes to help determine which is the most suitable for factory compressed air.
Answer: In the industrial field, compressed air plays an important role. As a power source and process gas, it is widely used in various industrial production processes. However, for some specific rows
The pressure of compressed air can reach very high levels, but the specific number of kilograms (here refers to the pressure unit, 1 kilogram is approximately equal to 0.098MPa) depends on a variety of factors, including the type of compressor, design specifications, operating conditions and The required application. The following is
压缩空气进车间的压力一般在0.5MPa至0.8MPa之间，具体分析如下： 车身维修车间：该场景下压缩空气主要用于喷漆、气动工具操作等，为保证设备正常工作及操作安全，压力通常设定在0.5M
Analysis of 1. Core Quality Requirements for Compressed Air GMP Standards in the Pharmaceutical Industry The quality requirements of compressed air in the pharmaceutical industry strictly follow GMP (Good Manufacturing Practice for Drugs), aiming to ensure that the drug production process is not contaminated and to ensure patient safety. Its core standards can be
The working life of the screw machine is not a fixed value, but is affected by many factors. The following is a detailed analysis of the working life of the screw machine and its influencing factors: The working life of the 1. screw machine The working life of the screw machine is usually between 5 and 15 years,
In the field of highly precise semiconductor testing, compressed air is not only an important power source for the operation of the production line, but also a key factor to ensure test accuracy and product yield. For the semiconductor tester, the quality, dryness, cleanliness and pressure of the compressed air
When discussing whether the air compressor needs water, we have to mention the advanced product of the water lubricated screw air compressor produced by Shanghai Granklin Group. In fact, not all types of air compressors need water, but water-lubricated screw air compressors are a
Screw air compressor: frequency conversion and power frequency, which is better? In the discussion of screw air compressor, we often encounter the choice of two types of frequency conversion and power frequency. In order to clarify which type is better, we can look at performance, energy saving, scope of application, and cost.
Industry practice on factory air pressure standards shows that in industrial production, compressed air is a common power source, and its pressure setting needs to take into account equipment performance, process requirements and safety specifications. The following from the perspective of technical principles and industry practice, for your detailed analysis of the factory pressure
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
