2026-04-13Views:
in the field of air compressors, the difference between oil-free and oil-free is not only reflected in the technical level, but also related to air quality and environmental protection standards. The water-lubricated screw air compressor produced by Shanghai Granklin Group has led the new fashion of the air compressor industry with its unique oil-free design.
The traditional oil air compressor reduces friction, reduces wear and improves the efficiency of equipment operation by lubricating oil. However, this process will inevitably produce oil mist and oil pollution, the quality of compressed air pollution, especially in food, medicine and other industries with high air quality requirements, the use of oil air compressor is limited.
In contrast, the water-lubricated screw air compressor of Shanghai Grankering Group adopts a new oil-free design concept. It uses water as a lubricant, which completely avoids the pollution of the compressed air by the lubricating oil and ensures the purity of the compressed air. At the same time, the high heat capacity and good thermal conductivity of water also make the cooling effect of the air compressor more excellent, effectively preventing the equipment from overheating and performance degradation.
In addition, the water-lubricated screw air compressor also has the advantages of low maintenance cost, environmental protection and health. Since there is no such consumable as lubricating oil, users do not need to regularly replace lubricating oil and cleaning oil filters and other components, which greatly saves maintenance costs and time. At the same time, the operation of oil-free air compressors is more environmentally friendly and healthy, and will not produce harmful oil mist and exhaust gas, which is conducive to protecting the environment and employee health.
In summary, the water-lubricated screw air compressor produced by Shanghai Grankering Group stands out in the air compressor industry due to its oil-free, efficient and environmentally friendly characteristics. It not only meets the demand of high-end industry for pure compressed air, but also provides strong support for the sustainable development of enterprises.
Answer: The difference between a compressor and an air compressor is mainly manifested in the following aspects: Different compression media: An air compressor is a machine that compresses and stores air, and the compression medium is air. And the compressor wide
Permanent magnet screw air compressor has many advantages, such as high efficiency and energy saving, stability and reliability, intelligent control, long life, low noise, strong adaptability and so on. It is an efficient and reliable power equipment in industrial production. The specific analysis is as follows: high efficiency and energy saving: permanent magnet screw air compressor adopts permanent magnet
In the field of air compressors, PPM(Parts Per Million) is usually not a parameter used to directly describe the performance of air compressors. However, in the quality detection of compressed air, PPM is an important indicator, it is the representation of volume concentration, used to quantify the compressed air
Screw air compressor host imbalance may have the following reasons: power supply problems: voltage imbalance or power supply fluctuations, and poor contact of a contactor may lead to host imbalance. Check whether the three-phase voltage is balanced, if the voltage is unbalanced, it will
The start-up sequence of the cold dryer and air compressor usually depends on the specific usage scenario and equipment configuration. However, under normal circumstances, it is recommended to start the air compressor first, and then start the cold dryer. The following is the specific boot sequence and its reasons: start the air compressor: first
When the water vapor of the air compressor is more, it can be solved from the following aspects: 1. check and maintain the installation of the drainage system and regularly check the drain valve: install the drain valve at the bottom of the air tank of the air compressor to ensure that the condensate can be smoothly discharged. Periodic inspection
The screw air compressor cannot supply air for the following reasons: The air intake filter is clogged: After long-term operation, the air intake filter may accumulate or be blocked, resulting in a decrease in air intake, which affects the air supply of the air compressor. ability. Regular cleaning or replacement of the filter is the solution to this
Answer: Oil-free air compressor usually uses water-lubricated screw air compressor, water-lubricated air compressor consumables are air filter and water filter. The loss of water-lubricated oil-free air compressor is relatively much less,
The working pressure of the air compressor is an important technical parameter, which is usually determined according to the specific application requirements and the design of the air compressor. Generally speaking, the working pressure range of the air compressor is wide, which can meet the needs of different industrial occasions. In common industrial applications
Oil-free air compressors and oil-free air compressors have their own advantages and applicable scenarios, and there is no absolute "good" or "bad". The choice of which type of air compressor depends on the specific application requirements and the use of the environment. No oil empty
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2