What is the air oil content ppm of the micro-oil screw compressor

The air oil content standard of the micro-oil screw compressor is measured under standard conditions and generally does not exceed 5ppm. However, in practical applications, the oil content may vary due to various factors. Some data show that the discharge oil content of micro oil screw air compressor usually contains 30 to 40 mg of oil per cubic meter of compressed air, which can be converted into ppm (parts per million) units, that is, 30ppm to 40ppm. However, there are also some more stringent standards, such as the oil content at the outlet of the micro-oil screw air compressor can be controlled to no more than 5ppm in some cases. Excessive oil content may cause blockage and corrosion to the gas pipeline, and also cause pollution to industrial products. Therefore, it is very necessary to control the oil content of the micro-oil screw air compressor.

In addition, the use of air compressor temperature and operating environment will also affect the oil content, the use and operation of the higher the temperature, the oil content may also increase. Please note that this information is based on general conditions and industry standards. The air oil content of specific micro-oil screw compressors may vary depending on the brand and model. If accurate data is required, it is recommended to refer directly to the specification of the specific device or contact the device manufacturer.