2026-04-09Views：
Oil-free water lubrication screw air compressor is now the air compressor industry leader, its working principle is better than the twin screw air compressor, has six characteristics are as follows:
1. Good structure: the symmetrical position of the two star wheels of the single screw air compressor on both sides of the screw makes the single screw air compressor not only have no unbalanced inertial force, but also the axial force and radial force acting on the screw cancel each other out. This is an advanced and significant feature of the single screw compressor design.
2. High efficiency: the specific heat of water is large, and the working process is similar to isothermal compression. There is no clearance volume in the single screw air compressor in theory. When the screw speed is about 3000 rpm/min, the power lubrication performance is excellent, which determines The single screw compressor has high working efficiency,
3. Low noise: the meshing pair of single screw air compressor is made of polymer material, the motor is directly connected with the screw without intermediate transmission gear, and the box plate is pasted with sound-absorbing material, so the operation noise is extremely small.
4. Small vibration: The single screw air compressor has a superior power balance system, which can effectively suppress the vibration source and make the machine run extremely balanced without any special requirements for the foundation.
5. Zero discharge: Only lubricating water similar to drinking water standard in the machine participates in the cooling, sealing and lubrication of the compression process. The machine runs without any "three wastes" discharge.
6. Can be monitored: intelligent monitoring as the concept of impeachment, to achieve the interpretation of the scientific traceability principle. Real-time monitoring of the compressor, the prevention of accidents, the timely alarm of failures, and the display on the designated computer are very important to the prevention of production accidents.
When the air from the air compressor contains moisture, the following measures can be taken to solve this problem: 1. check and maintain the drainage system to install a drain valve: install a drain valve at the bottom of the air compressor's air storage tank, and drain the condensate regularly. This is to prevent liquid water from accumulating
In a factory environment, conventional air pressure usually refers to atmospheric pressure, that is, the pressure exerted by the air in our surrounding environment on the surface of an object per unit area. Generally speaking, the conventional air pressure of the factory is similar to the standard atmospheric pressure, which is defined as 101325 Pa S.
When discussing which screw air compressor is good, the water lubricated screw air compressor produced by Shanghai Granklin Group is undoubtedly the leader in the industry. Granklin Group has won wide market recognition for its excellent product performance and environmental protection characteristics. Granklin Group Student
In the process of microbial fermentation feed production, air compressor is one of the key equipment, and its function runs through many links of fermentation process. Granklin water-lubricated screw air compressor with oil-free clean, stable and efficient technical characteristics, can provide a reliable gas source for microbial fermentation.
Q: What is the compressed air standard in the food industry? Answer: The food industry has very high requirements for compressed air standards, mainly including the following aspects: Purity: The food industry requires that compressed air must be oil-free and tasteless to ensure food quality and quality.
Medical compressed air as a key infrastructure of modern medical system, its application throughout life support, precision treatment, equipment drive and other core areas. The technical value and quality requirements are as follows
If there is a large number of air blowing and cooling processes in your processing, the air consumption will be obviously too large. It is suggested to directly match the air volume according to 8 cubic meters per minute or even higher. It is better to match the air pressure instead of being too small, so as not to report to the police and stop the machine when working, which will affect the production.
The working pressure and the maximum working pressure of the air compressor are two important parameters in the operation of the air compressor. The following are explained separately: working pressure definition: working pressure refers to the pressure value reached by the compressed gas during normal operation of the air compressor.
Vortex compressors and screw compressors are two different types of compressors, which differ significantly in their working principles, structural characteristics and application areas. The following are the main differences between the two: 1. working principle: vortex compressor: its work
The frequency of the air compressor depends on a number of factors, including the humidity of the environment, the working load of the air compressor and the capacity of the gas tank. The following are some general suggestions: 1. regular water discharge frequency under normal environment: under normal use environment, it is recommended that each
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
