2026-04-09Views：
Can't find a good brand for purchasing air compressors, and the air compressors sold nearby are not satisfied?
The demand is real. The problem that you can't find a good business in purchasing a screw air compressor suitable for your own use appears in many factory projects.
Contact us "Shanghai Granklin Group", there are distributors all over the country can also be purchased directly from the factory.
The air compressor only takes a short time from order to delivery, and the air compressor factory will provide you with services.
We have water-cooled oil-free air compressor, air-cooled oil-free air compressor, water-lubricated air compressor, screw air compressor, power frequency air compressor, frequency conversion air compressor.
According to the needs of environmental users to do air compressor products for you.
Compressed air oil content standards vary by application and industry. The following are some common oil content standards for compressed air: Chinese Pharmacopoeia and GMP standards: require compressed air oil content ≤ 0.1 mg/m & sup3;. This standard is from the European Pharmacopoeia regulations.
Water lubricated air compressor cooling water requirements mainly include the following aspects: water quality requirements: cooling water must be clean, can not contain too many impurities, suspended solids, organic matter or corrosive substances. These contaminants can cause clogging of the waterway system
The calculation of the gas consumption of the bottle blowing machine should be combined with the working principle of the equipment, production efficiency and actual gas demand to ensure that the capacity of the air compressor matches the bottle blowing process. Granklin water-lubricated single screw air compressor can be used for bottle blowing machines with stable pressure output and oil-free cleaning characteristics.
The compressor does not belong to, and the air storage tank matched with the air compressor belongs. Compressor dynamic equipment does not belong to special equipment, but as long as the working pressure of the gas storage tank and the connected pipeline is greater than or equal to 0.1Mpa, the volume and pipe diameter are greater than or equal to 25mm, it belongs to special equipment. If you are
Screw air compressor does exist without oil pressure model, that is, oil-free screw air compressor. This type of air compressor does not need to use lubricating oil during operation, so it is also called oil-free air compressor. They operate primarily through water lubrication or other oil-free lubrication techniques, thus avoiding
Q: Is the air compressor an automated equipment? A: The degree of automation is high, and the air compressor has been automatically controlled. The "water-lubricated air compressor" produced by Shanghai Granklin Group realizes the all-weather intelligence of the air compressor through the intelligent controller.
The appropriate gas flow rate of the factory gas shall be comprehensively determined according to the specific equipment requirements, process requirements and future expansibility. The core principle is that the total gas consumption shall cover the gas demand of all in-use equipment and reserve 20% allowance. The following is a specific analysis: 1. gas flow demand
The standard value of the air compressor inlet pressure varies with the type, specification and actual working conditions of the air compressor. Generally speaking, the standard range of air compressor inlet pressure is roughly 300~400 KPA. However, there are also views that the pressure range of ordinary air compressor is 0.7Mp
The air pressure standard for the production workshop is not fixed, but is determined according to the specific application scenario and equipment requirements. The following are some common air pressure standards for air used in production workshops and related information: Standard atmospheric pressure: In industrial production, commonly used
In laser applications, in order to ensure cutting quality and equipment safety, the oil content of the air compressor needs to be controlled at a very low level, usually requiring an oil content of less than 0.001ppm, and some high-precision scenes even require no oil. The following is a detailed description of this requirement: during laser cutting
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
