2026-04-10Views：
there is no definite time standard for the replacement of air compressor maintenance oil. For general mineral lubricating oil, 2000-3000 hours are recommended, semi-synthetic lubricating oil 4000-6000 hours are recommended, and fully synthetic lubricating oil 6000-8000 hours are recommended. Maintenance and replacement of lubricating oil depends not only on the type and quality of the oil, but also on the working environment and running time to determine the replacement frequency.
At present, there are many brands of air compressor lubricants on the market. Different brands and different types of base oils and additives are different. Due to the different quality of lubricants, the replacement time is determined. It is necessary to choose suitable lubricants and cannot be mixed.
The operating environment will also affect the loss of oil. The surrounding environment temperature is high, and the equipment operation burden will increase, which will increase fuel consumption. Therefore, it is necessary to regularly inspect the equipment and always pay attention to the oil level of the oil sight glass. If the lubricating oil is not enough or the color is wrong, Add or replace the lubricating oil in time.
Pay attention to when changing lubricating oil:
1. Oil can only be released when the air compressor is shut down and there is no pressure in the machine and the machine body is at normal temperature;
2. Open the oil drain valve to drain the oil into a suitable container, until no oil flows out when the valve is closed;
3. Remove the temperature control bypass valve and drain the remaining lubricating oil in the main engine;
4. Fill up new lubricating oil (the oil exceeds 1/2 of the oil sight glass) after the oil is released, and tighten the bolt of the oil filling hole;
5. Start the air compressor to run for 10 minutes, stop the machine to check the oil level, and if it is insufficient, add lubricating oil.
6. The replaced waste oil is likely to cause pollution and fire, and must be collected and disposed of in accordance with local laws and regulations.
Air compressor oil change as far as possible to find professional air compressor maintenance and maintenance technicians, so as to avoid some details of the poor grasp and affect the service life of the entire unit, bring unnecessary losses.
Air compressor type variety, wide range of uses, and different types of air compressor, the lubrication requirements vary greatly. In the air compressor parts, the lubricating oil plays a role in preventing wear, sealing, and cooling, minimizing the influence of air on the viscosity of the lubricating oil and the reaction between additives and air, so as
What is the difference between the air compressor model? No friends in the industry may not know much about it, but you only need to make a phone call to us, Mr. Hu of "Shanghai granklin group", contact number: 13918023456.
Air compressor is a general-purpose machine, which can be widely used in various industries. It can be said that it is one of the indispensable equipment for many equipment, providing compression power requirements for the machine. Customers who know about air compressors are no strangers to air compressors, but for customers who don't know, it's true.
Air compressor is very common in our daily work, mainly used in pharmaceutical manufacturing, food processing, industrial pneumatic equipment, painting, textile, industrial and mining equipment and so on.
View detailsThe water-lubricated integrated air compressor produced by Shanghai Granklin Group, the water-lubricated air compressor widely praised by users, provides users with pure oil-free compressed gas.
Manufacturers who need compressors often cannot tell the difference between oil-free screw air compressors and oil-free scroll air compressors. In fact, there are many similarities and differences between screw machine and scroll machine. The following granklin water lubricated air compressor manufacturers compare and distinguish through working principle, detailed comparison data, advantages and application scenarios.
View detailsWhen it comes to air compressor equipment, we all know that the operation of air compressor equipment is required to use lubricating oil, lubricating oil mainly play a role in reducing wear and prolong the life of the air compressor, so oil-free air compressor equipment is the same?
The air filter element is replaced every 1000-1500 hours under normal conditions. For places where the environment is particularly harsh, such as mines, ceramic factories, cotton mills, etc., it is recommended to replace the air filter element every 500 hours. When cleaning or replacing the air filter element, the components must be matched one by one to prevent differences.
Permanent magnet variable frequency air compressor has always been sought after by industrial enterprises with the characteristics of high efficiency, energy saving and environmental protection, and its energy saving effect is also very considerable. In recent years, more and more air compressors with high energy consumption have been replaced by permanent magnet variable frequency air compressors on the market.
During the working process of the air compressor, the temperature will be too high. At the same time, when the air compressor is used for a period of time, it will be easily contaminated with dust, so it is necessary to regularly clean the air compressor and dissipate heat.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
