Screw air compressor vibration big how to return a responsibility

A high-pressure screw compressor is a machine that compresses free air to more than 10 MPa. After flowing through the separator and filter in the device, the water, oil and impurities contained in the high-pressure air are removed, so the discharged gas is clean and tasteless. However, the high-pressure screw compressor will also fail in use. Only by finding out the cause of failure can we prescribe the right medicine. Let's take a look at the causes of high pressure screw compressor vibration.

1. First of all, the maintenance personnel should remember to check whether the oil supply of the high-pressure screw compressor is sufficient. If the lubricating oil of the equipment is insufficient, the friction between the parts will increase. In order to reduce vibration, it is necessary to ensure an adequate supply of lubricating oil for the equipment.

2. If the bearings of the high-pressure screw compressor or high-pressure compressor are severely worn, it will also cause vibration and the bearings need to be replaced.

3. Check whether the rotor of the equipment is deformed, which will cause the gap between the rotors to not meet the industry standard. Repair or replace the rotor.

4. If the precision filter of the high-pressure screw compressor is blocked, it will affect the normal passage of compressed air and bring vibration. It is recommended to clean the filter and replace it if necessary.

5. Check whether the anchor bolts of the vehicle equipment are loose. If this is the case, it means that the machine will vibrate during operation, which will cause vibration. Adjust to the appropriate position.