Common Functions and Functions of Screw Air Compressor Control Panel

What are the functions and functions of the screw air compressor control panel

(1) Basic operation keys:

1) Start. Start the air compressor under normal working conditions.

2) Stop. Stop the air compressor under normal working conditions

3) Tight stop/reset. This button is photographed in an emergency, or in the case of not allowing the boot, cut off the AC power, at this time press the "start button" air compressor controller does not respond. The tight stop also has the function of fault reset.

4) Remote. Local switching. Single-machine control and joint control switching

(2) Alarm function:

1) Air filter blocking alarm

2) Oil filter clogged alarm

3) Oil and gas separator blocking alarm

4) Electrical light fault alarm, including program error (no start), host overload (emergency shutdown), cooling fan overload (emergency shutdown)

5) High host temperature (emergency shutdown), high exhaust temperature (emergency shutdown)

6) Alarm for high cooler temperature and alarm for water loss of cooler

(3) the role of the indicator:

1) Air filter alarm indicator. When the air filter is blocked or the timing time is up, the air filter alarm indicator is always on.

2) Oil filter alarm indicator. When the oil filter is blocked or the timing time is up, the oil filter alarm indicator is always on.

3) Oil and gas separator alarm indicator. When the oil-gas separator is blocked or the timing is up, the oil-gas separator alarm indicator is always on.

4) When the host is overloaded, the electrical fault indicator is always on and stops

5) When the exhaust temperature is high, the exhaust high temperature indicator light is always on and the machine stops.

6) Power indicator light, when the controller is normally powered, the power indicator light is always on

7) Remote control indicator light, when the air compressor is under remote joint control, the remote control indicator light is always on

8) Standby indicator light, when other definitions are faulty, the standby indicator light is always on