2026-04-10Views：
1. permanent magnet variable frequency air compressor advantages introduction:
1. Stable air pressure
because the variable frequency screw air compressor uses the stepless speed regulation characteristics of the frequency converter, it can start smoothly through the controller or the PID regulator inside the frequency converter. For occasions with large fluctuations in gas consumption, it can quickly adjust the response.
2. Variable flow control
the power frequency driven air compressor can only work in one exhaust volume, and the variable frequency air compressor can work in a relatively wide range of exhaust volume. The frequency converter is based on the actual gas consumption to adjust the motor speed in real time to control the displacement. When the gas consumption is low, the air compressor can also be automatically dormant, thus greatly reducing the loss of energy.
3. Start without impact
since the frequency converter itself includes the function of a soft starter, the starting current * * * is within 1.2 times of the rated current, which is very small compared with the power frequency starting, which is generally more than 6 times of the rated current. This impact is not only on the power grid, but also on the entire mechanical system.
4. Low noise
most of the working conditions of the frequency conversion system are lower than the rated speed, and the mechanical noise and wear of the main engine are reduced, which prolongs the maintenance and service life. If the fan is also driven by variable frequency, the noise of the air compressor can be significantly reduced.
5. The voltage adaptability of AC power supply is better
due to the over-modulation technology used by the inverter, it can still output sufficient torque to drive the motor when the AC power supply voltage is slightly lower. If the voltage is slightly higher, it will not cause the voltage output to the motor to be higher. For self-generating occasions, variable frequency drive can show its advantages.
So as mentioned above, the permanent magnet variable frequency screw air compressor is really so "* * *"? Obviously not, let's take a look at the shortcomings of the permanent magnet variable frequency air compressor.
2. permanent magnet variable frequency air compressor shortcomings:
although the variable frequency air compressor is good, but because of its own composition principle, the user also has to bear certain risks in the process of using the permanent magnet variable frequency air compressor. Among them, the risk of * * * is degaussing caused by high temperature. We all know that permanent magnet motor in the element is magnetic steel, and magnetic steel is most afraid of high temperature. The permanent magnet variable frequency air compressor will gradually demagnetize under high temperature for a long time. The higher the temperature, the greater the risk of demagnetization.
There are many cases of permanent magnet air compressor function failure caused by magnetic steel demagnetization when using permanent magnet air compressor in various industries. Once the permanent magnet air compressor is demagnetized, the current of the motor will continue to increase after partial demagnetization, and the energy consumption will rise, which will increase the electricity cost of users. At the same time, there is the possibility of "* * *" of the motor at any time, which may seriously lead to scrapping the finished products of products.
Types of oil-free air compressors are divided according to whether the compressed air contains oil or not, corresponding to oil-free air compressors or micro-oil air compressors. Oil-free air compressors are distinguished according to different compression forms or different host structures. Several common oil-free air compressors are: oil-free
View detailsIn an increasingly competitive industry, customers are often misled by lower air compressor prices and buy an air compressor with low price but poor quality. Here is a brief introduction to the relevant knowledge about the price of air compressor.
View detailsThe air compressor maintenance work needs to be carried out regularly by the user. As the air compressor maintenance manufacturer, the user should remind the user that some important and key links cannot be ignored during the maintenance process. What matters should the user pay attention to during the maintenance operation?
Screw air compressor factory direct good? Air compressor is a large energy consumption for enterprises, so how to reduce procurement costs! In today's complicated relationship, contact the manufacturer to get the best air compressor price.
Shanghai granklin group produces water-lubricated air compressors, which use water-lubricated air compressor heads. The whole air compressor does not contain oil, and the following problems with oil screw air compressors will not occur.
View detailsMany industries require compressed air to be anhydrous, but the air compressor often has water. What are the reasons for the air compressor having water?
Therefore, the suction pressure of the compressor can be appropriately increased, and a high-efficiency cyclone inlet separator can be added in one stage of suction to further eliminate the resistance of the air inlet pipe network, and a higher suction pressure can be obtained while ensuring sufficient processing air. The pressure drop between the 1.2 compressor sections is reduced. The pressure drop between the compressor stages is also an important reason for the power consumption of the compressor.
The water-lubricated oil-free air compressor has the characteristics of energy saving, environmental protection, stability and durability. It has been widely used in many industries, and the maintenance and maintenance of oil-free air compressors are also concerned by users. The correct daily maintenance and use, can be extended.
Granklin air compressor is the first choice. The air compressor produced by Granklin Group adopts water lubrication, the whole machine is made of stainless steel, and the compressed gas is 100% free of oil. The traditional method of determining the compressed air requirements of a new air compressor is to use the gas volume of all gas-using equipment.
In the market, many enterprises will choose "screw air compressor" to compress gas. For enterprises with higher gas requirements, they will prefer to use "water lubricated air compressor manufacturer" and "oil-free water lubricated air compressor" produced by "Shanghai granklin group". At present, the performance and quality of domestic machines have surpassed foreign brands. "Shanghai Granklin Group" equipment stability, timely and thoughtful after-sales. In fact, the purchase of "air compressor" is these two points are very important.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
