2026-04-10Views：
When the air compressor wants to remove water, only a filter can be added to remove part of it. However, due to the high exhaust temperature and a certain pressure, when the external temperature of the end pipeline is low, condensed water will be formed and brought into the end use equipment!
According to the actual working conditions, it is recommended to add a cold dryer or a suction dryer. Other methods cannot solve the fundamental problem. The gas storage tank can remove water, only about 4%, and adding a steam-water separator alone will not have much effect.
Only combined with the actual situation, according to the need to do a good job of air compressor equipment configuration, in order to better let the gas to meet the demand.
If the water removal equipment is installed and there is still water, the cold dryer and filter need to be replaced and maintained.
General filter needs to be replaced inside the filter.
Cold dryer to see whether it is frozen or adsorption type, generally need to replace the molecular sieve and refrigerant.
In addition, it should be noted that the drain valve of the gas storage tank should be drained frequently, and the drain valve under the precision filter should also be drained frequently. Cold dryers and filters should be regularly maintained.
The water-lubricated air compressor produced by Shanghai Granklin Group is simpler and more labor-saving than the traditional oil-injected screw air compressor. The gas production of single screw air compressor is lower than that of twin screw air compressor in energy consumption. Basic maintenance In order to enable the air compressor to operate normally and reliably and ensure the service life of the unit, a detailed maintenance plan must be formulated, and the fixed person operation, regular maintenance, and regular inspection and maintenance must be carried out to keep the air compressor unit clean, oil-free and free. Dirt.
The solution to the water in the air of the air compressor is as follows: 1. There is a drain valve at the bottom of the air compressor cooler. As long as the drain valve is opened immediately, the water inside can be drained clean. 2. You can also install a drain valve at the lowest end of the air compressor storage tank, or
The lubricating oil used in the air compressor generally cannot be replaced by the oil currently purchased on the market. The air compressor must use special lubricating oil, which should conform to the natural environment of the factory and the air compressor model and specification of the air compressor you are applying. Types of air compressor oil on the market, brands
How to distinguish oil-free air compressor is good or bad, reduce cost, energy saving and environmental protection, work efficiency and noise pollution is still very low. In the choice of permanent magnet variable frequency air compressor to choose a good oil free air compressor.
View detailsWhen the air compressor is in use, when the air humidity is high, there will be more water after the compressed air. If the air is dry in winter, there will be less water. If it is troublesome to put it, it is recommended to install an automatic timing discharge device, and the cost of self-operation should be 300 or 400. According to the air compressor
The specific application role of air compressors in various industries? Air compressors are used in electric power, textile, steel, food, pharmaceutical, breathing, diving, fire fighting, electronics, machinery, equipment, automobiles, packaging, printing, toys, chemicals, energy
Oil-free screw air compressor is an air pressure generating device. Today's resistance to introduce the common problems of oil-free screw air compressor. 1. When the oil-free screw air compressor is shut down due to power failure, in order to prevent the air compressor from starting up under pressure, the gas in the road should be drained before starting up, and then the installation should be restarted.
For ordinary production industries, the requirements for air compressors are not very strict. At this time, you can choose an air compressor with oil or micro-oil. After all, the cost of an air compressor with oil or micro-oil is different. And for some of the air compressor requirements are more stringent enterprises, such as laser cutting, medical and other industries, will be more stringent requirements on the air compressor, the need for air compressor can reach the standard of oil-free. This time to choose an oil-free air compressor.
Shanghai granklin group water lubrication air compressor manufacturer, as a member of the air compressor industry, we talk about other types of air compressors, such as dry oil-free air compressors. Dry oil-free air compressor its product advantages are:
View detailsChoose Shanghai Granklin Group to purchase air compressors, whether it is price or service, do not lose imported screw air compressors. As for the price of an air compressor, the things involved are also in all aspects. Price is an important reference standard, but it is not the only weighing standard. We will definitely get good results under a telephone consultation.
View details
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
