Purchase explosion-proof air compressor may wish to see the water lubricated air compressor

The water-lubricated air compressor produced by Shanghai Granklin Group is suitable for compressing nitrogen, argon, natural gas and other gases in safety and explosion-proof treatment. Safety explosion-proof air compressor Granklin Group has rich experience and can work stably for a long time in various scenarios.

Screw air compressor is a kind of air compressor, there are two kinds of double screw air compressor and single screw air compressor. The invention of the twin screw air compressor is more than ten years later than the single screw air compressor, and the design of the double screw air compressor is more reasonable and advanced.

single screw air compressor is also called worm air compressor. The meshing pair of single screw air compressor consists of a 6-head screw and 2 11-tooth star wheels. Screw compressor is a working volume for rotary motion of the volumetric gas compression machinery.

The compression of gas depends on the change of volume, and the change of volume is achieved by the rotary motion of a pair of rotors of the compressor in the casing.

The vulnerable parts of the main engine of the screw air compressor mainly include: gaskets, sealing rings, shaft oil seals, etc., especially the shaft oil seal, which is exposed to high temperature, high pressure, and high-speed working environment for a long time, and its service life ratio is shortened.

The screw air compressor has a rated power. If there is a container for storing compressed air, and the pressure in the container is less than the rated pressure of the air compressor, the air compressor will work. When air is not used, when the air compressor reaches the rated power, the air compressor will stop.

the direct result of its damage is the formation of compressor oil leakage, if not found in time, it will form a yin and yang rotor and bearing due to the lack of smooth and burned. Deformation of components.

When there is an air storage tank, even if the air compressor is stopped, the compressed air can be used as usual, because the compressed air is stored in the air storage tank. The screw air compressor starts frequently, and the motor starting current is very large. Generally, the starting current is higher than the normal working current, and then the energy consumption is relatively large.

Screw air compressor in the start and stop process, the air compressor is in no-load state. If this process is long, it will waste a lot of energy. With an air system equipped with an air storage tank, the air compressor can be stopped under a stable pressure, which not only ensures the continuity of work, but also prevents the machine from wasting energy due to unnecessary idling.

Assuming that the screw air compressor displacement is 2 cubic meters, if the company's gas consumption is relatively large, it is recommended to buy 2 cubic meters of air storage tanks, so that the air storage tank can be filled in a short time and reach the rated pressure. Generally, according to the different production needs and gas consumption of each enterprise, you can decide how many gas tanks to use.