Focused on compressed air system design, air treatment, piping configuration, equipment maintenance, and common industrial air issues, with practical guidance based on pressure, flow, dew point, air quality, and operating conditions for equipment selection, system optimization, and routine operation and maintenance.
The solid particle grade of compressed air in the food industry usually follows the relevant international or national standards. Among them, ISO 8573-1 is an international standard on the purity level of compressed air, which specifies the maximum allowable content of solid particles, water and oil. For food
The discharge oil content of screw compressors is usually expressed in ppm(parts per million, parts per million). This is a concentration unit used to describe the proportion of oil in the gas discharged from the compressor. The smaller the ppm value, the oil content in the gas
The maintenance cycle of the star wheel host of the oil-free water lubrication air compressor depends on a number of factors, including the frequency of use of the equipment, the operating environment, and the maintenance of the equipment. Generally, the manufacturer will provide a suggested maintenance schedule, but the actual maintenance period may
The air compressed by the air compressor usually contains moisture, which may cause damage to the equipment using the air. Therefore, gas water removal is a very important part of the air compressor system. The following are some air compressor gas water removal methods: cooling method:
Compressed air is used in many different types of plants. Compressed air is widely used in industrial production, mainly related to the following aspects: Power industry: In the power industry, compressed air is often used in the control system of instruments and pneumatic valves, but also used
The following are some air compressor terms in Chinese and English: Air Compressor-Air Compressor Piston Air Compressor-Piston Compressor Screw Air Compressor-Screw Compressor Sliding Air Compressor-Rotary
Reciprocating compressor outlet oil content is an important index, it is affected by many factors. The following are some key points about the oil content at the outlet of the reciprocating compressor: Influencing factors: The working state of the compressor: The working state of the compressor will directly
Air compressor safety measures mainly include the following: installation of exhaust valve: effective control of pressure release, to prevent excessive pressure caused by explosion. Regular inspection and maintenance: to ensure the normal operation of the air compressor, reduce the occurrence of failures and accidents. Check contents
Whether the fermentation compressed air pipeline needs to be insulated depends on the specific application environment and needs. Generally speaking, because the thermal conductivity of air as the medium itself is very weak, and the way of air heat transfer is mainly convective heat transfer, the heat transfer coefficient is small, so the compressed air pipeline
Oil-free rotary air compressor and oil-free screw air compressor have their own unique advantages and disadvantages, which is better depends on the actual application scenarios and needs. The advantages of oil-free rotary tooth air compressors include: oil-free, so there is no need to change the air compressor oil, free
