Focused on compressed air system design, air treatment, piping configuration, equipment maintenance, and common industrial air issues, with practical guidance based on pressure, flow, dew point, air quality, and operating conditions for equipment selection, system optimization, and routine operation and maintenance.
The comparison of the durability of oil-free air compressors and oil-free air compressors is a complex issue because it is affected by many factors, including equipment quality, maintenance, and use environment. In general, there is no clear distinction between the two in terms of durability, but rather each.
The power range of the 20 cubic air compressor is usually between 90KW and 160KW. The specific power may vary depending on the brand, model and working pressure. For example, under a working pressure of 0.75 MPa-1.3MPa(7.5-13kg), some common
The problem of water in the air pipe of the air compressor can be solved by the following methods: Install and use the drain valve regularly: Install the drain valve at the bottom of the cooler of the air compressor or the lowest end of the air storage tank, and open the drain valve regularly to exclude water. This can have
Air compressor according to the gas selection after treatment method can be summarized into the following steps: determine the rated air compressor: first of all, the need to clear the rated air compressor, which is the basis for the selection of post-processing equipment. Rated gas volume usually refers to the air compressor
There may be many reasons why the air compressor cannot start after being shut down for too long, mainly including the following aspects: Electrical problems: The start-stop control system of the air compressor is composed of various control circuits and safety circuits. When it cannot be started after being shut down for too long, it needs to be checked first
Air compressor tank is a pressure vessel. Definition and use: The main function of the air storage tank is to store compressed air so that it can be released into the air system when needed. This storage method is to meet the needs of the time, or in the air compressor can not meet.
Whether the compressed air tank belongs to special equipment depends on its design pressure and volume. According to publicly released information, only industrial compressed air tanks with a design pressure greater than 0.1MPa are regarded as special equipment and need to be managed in accordance with specific laws and regulations.
It is a common problem that the air inside the air compressor contains moisture, which is usually due to the water vapor in the air condensing into water during the compression process. In order to solve this problem, the following measures can be taken to remove the moisture in the air compressor: Install a drain valve:
The choice of power frequency or frequency conversion of air compressor depends mainly on the specific needs and application scenarios. Both have their advantages, and there is no absolute "good" or "bad". The following is a comparison of the characteristics of power frequency air compressors and variable frequency air compressors
The shortcomings of the permanent magnet variable frequency air compressor mainly include the following: Oil problem: For the oil-injected permanent magnet variable frequency air compressor, the compressed air contains oil, which may not be applicable in specific industries such as the food industry, because Oil may pollute the product. Rotor
