How to select and post-process the air compressor according to the amount of air

Air compressor according to the amount of air after treatment method can be summarized as the following steps:

determine the rated gas volume of the air compressor:

first of all, it is necessary to clarify the rated air volume of the air compressor, which is the basis for selecting post-processing equipment. The rated air volume usually refers to the volume of compressed air that the air compressor can produce per minute under standard operating conditions.

Select purification system:

according to the rated air volume of the air compressor, select the appropriate purification system. The main function of the purification system is to remove the oil, moisture and impurities in the compressed air to ensure air quality. The processing capacity of the purification system should match the rated gas volume of the air compressor to ensure effective purification effect.

Determine dryer power:

A dryer is a device used to further remove moisture from compressed air. When selecting a dryer, the power of the dryer needs to be determined according to the rated air volume, intake air temperature, rated pressure and ambient temperature of the air compressor. Ensure that the dryer has sufficient processing capacity to meet the air compressor displacement requirements.

Configure the appropriate filter:

the choice of filter is also determined according to the rated air volume of the air compressor. The purpose of the filter is to further remove tiny particles and impurities from the compressed air. According to the oil content index and dust content index, select and configure the corresponding level of filter, and ensure that the flow of the filter matches the rated air volume of the air compressor.

the choice of gas tank:

the setting of the air storage tank also plays an important role in the compressed air system of the air compressor. The volume of the air storage tank should be about 1/6 of the compressor exhaust volume, which can be appropriately enlarged according to the working conditions. This ensures that the system can stably provide compressed air when the compressor discharge fluctuates.

In summary, the selection of post-processing equipment according to the rated air volume of the air compressor requires comprehensive consideration of the configuration of various components such as the purification system, dryer, filter and gas storage tank. Through reasonable selection and configuration, it can be ensured that the quality and stability of the compressed air provided by the air compressor meet the requirements of use.