Focused on compressed air system design, air treatment, piping configuration, equipment maintenance, and common industrial air issues, with practical guidance based on pressure, flow, dew point, air quality, and operating conditions for equipment selection, system optimization, and routine operation and maintenance.
The biological industry has strict requirements for compressed air, which are mainly reflected in the following aspects: Pressure: The air pressure at the outlet of the air compressor is usually required to be between 0.2 and 0.35MPa. This range can ensure that the compressed air is transported and used.
During the continuous use of the air compressor, if it is not properly maintained and maintained, there is indeed a risk of overheating or even burning. However, this does not mean that the air compressor will burn out, the key lies in the correct operation and maintenance. In order to avoid the air compressor
The problem that the gas from the air compressor contains moisture may be caused by a variety of factors. The following are some possible reasons and corresponding solutions: Reason: High ambient humidity: If the air itself contains high moisture, that is, the air humidity is high. When these air
Medical air compressors are widely used in medical institutions. They are mainly used to provide a clean and stable gas supply to meet the needs of medical equipment and patients. Specifically, the medical air compressor can be applied to the following departments: respiratory department: call
Medical compressed gas supply systems play a vital role in medical facilities, and their importance is mainly reflected in the following aspects: Supporting medical operations: In medical procedures, many surgical and diagnostic procedures require the use of medical gases, such as oxygen, Nitrogen
In view of the problem that there is water in the air pipe of the air compressor, the following measures can be taken to solve the problem: install or check the air-water separator: install the air-water separator at the outlet of the air compressor, which can effectively separate the moisture in the compressed air. If already
The service life of oil-free scroll compressors is affected by many factors, including but not limited to equipment quality, working load, maintenance and working environment. The following is a detailed analysis of the service life of oil-free scroll compressors: Equipment quality: high quality
The national standard of medical compressed air pressure mainly relates to the pressure range, accuracy and stability. The following are the key points of the national standard for medical compressed air pressure sorted out according to the publicly released information: pressure range: the pressure of medical compressed air
The electroplating workshop has relatively high requirements for compressed air, mainly considering the influence of compressed air on the electroplating process and quality. The following are the specific requirements for electroplating workshop compressed air: dust particles: dust particles in compressed air have a significant impact on electroplating quality
The compressed air quality standards generally used in factories mainly include the following aspects: Oil content: The oil content in compressed air is usually required to be low to avoid pollution to equipment and processes. In general, the oil content should be less than 5mg/m3. Moisture content
