The working pressure of the hospital air compressor is usually determined according to the specific use requirements. The following is a detailed analysis of the working pressure of the hospital air compressor:
1. general working pressure range
- medical and health uses generally speaking, the output pressure of air compressors for medical and health purposes is between 7-8bar(0.7-0.8MPa) to ensure the requirements of medical gas flow and purity. But there are also some special applications that may require higher pressures.
- Specific department needs for example, the oral treatment center has a large instantaneous demand for compressed air, and its compressed air pressure is generally 0.5MPa 0.8MPa, while the pressure of compressed air in wards and operating rooms is generally 0.4MPa0.5MPa.
Relationship between 2. pressure and flow rate
the flow of medical air compressor should be able to meet the gas demand of medical equipment. The specific flow requirements depend on the type and number of connected devices. The gas production is higher at the same power, indicating that the design is more scientific, more environmentally friendly and energy-saving, and the stability and durability will be better.
3. technical control requirements
- air drying and cleanliness the medical air compressor should adopt oil-free lubrication technology, as well as the inner wall treatment of the compressor air chamber and the plastic spraying treatment technology inside the air tank to ensure that the output air is clean and fresh. Air cleanliness should meet certain standards, such as particles ≤ 0.05 μm, air dryness (moisture content) ≤ 0.05ppm.
- Noise control medical air compressors must be controlled within 60 decibels to ensure that medical staff work in a relatively quiet environment.
- Requirements for use environment: The medical air compressor should work normally under the conditions of ambient temperature 5 ℃ ~ +40 ℃ and relative humidity ≤ 80% (non-condensing).
- Safety Standards: The medical air compressor should comply with relevant safety regulations, such as overvoltage protection, overheat protection and other functions to ensure the safe operation of the equipment.
To sum up, the working pressure of the hospital air compressor is the result of a comprehensive consideration of many factors. In practical applications, it is necessary to select the appropriate air compressor model and working pressure according to the needs of specific medical equipment, department characteristics and the overall environment of the hospital. At the same time, it is also necessary to pay attention to the technical control, noise control, environmental requirements and safety standards of the air compressor to ensure its stable, safe and efficient operation.
