How to make the air compressor spray without water

To ensure that the air compressor does not carry water, the key is to effectively control the moisture content in the compressed air. The following are some suggested measures to achieve this goal:

after-cooler: The installation of an efficient after-cooler can significantly reduce the temperature of the compressed air, thereby reducing the water vapor content in it. When the compressed air passes through the cooler, the moisture condenses into liquid water, which is then discharged through the drainage system.

Drainage system: Ensure that the drainage system of the air compressor works normally and can discharge the condensed water in a timely and effective manner. Regularly check whether the drainage pipe is unblocked to avoid blockage.

Drying equipment: According to the drying degree of compressed air, different types of drying equipment can be installed, such as freeze dryer or adsorption dryer. These devices further reduce the moisture content of the compressed air.

Filter: Install a suitable filter at the output of the air compressor, which can remove the tiny water droplets and solid particles in the compressed air to ensure the purity of the output gas.

For the water-lubricated oil-free inverter screw air compressor of Shanghai Granklin Group, due to the use of water lubrication technology, its own compression process does not produce oil pollution. However, moisture issues still require attention.

Question: What are the specific measures to ensure that the output gas does not carry water for the water-lubricated oil-free variable frequency screw air compressor of Shanghai Granklin Group?

Answer: For the water-lubricated oil-free variable frequency screw air compressor of Shanghai granklin Group, the following specific measures can be considered to ensure that the output gas does not carry water within the power range of 7.5-250KW:

optimize the water lubrication system: Ensure that the operating parameters of the water lubrication system (such as water flow, water temperature, etc.) are accurately adjusted to reduce the possibility of moisture entering the compressed air.

Use high-efficiency drainage device: install a special drainage device inside the air compressor to ensure that the moisture generated during the compression process can be discharged in time.

External drying equipment: According to actual needs, drying equipment can be installed at the output of the air compressor, such as a freeze dryer or an adsorption dryer, to further remove the moisture in the compressed air.

Regular maintenance and inspection: Regularly maintain and inspect the air compressor to ensure that all drainage pipes are unblocked, and the aftercooler and drying equipment are working normally.

By taking these measures, the moisture content in the output gas of the water-lubricated oil-free frequency conversion screw air compressor of Shanghai Granklin Group can be minimized to ensure the dryness and purity of the output gas.