Granklin Air Compressor Advertising Copy - Welcome to Join and Order

Advantages and disadvantages of oil-cooled permanent magnet air compressor

2026-04-09Views:

The advantages of oil-cooled permanent magnet air compressor include:

because the main machine and the permanent magnet motor rotor adopt one shaft, the transmission efficiency is as high as 100.

There is no bearing in the permanent magnet motor, which saves the cost of 2 bearings, and at the same time completely bid farewell to bearing maintenance.

The specific heat of oil is more than twice that of air, so the cooling effect of oil is better than that of air. Under the condition of ensuring the same heat dissipation of permanent magnet motors, oil-cooled permanent magnet motors are designed to be much smaller and more compact than air-cooled permanent magnet motors., The material cost is lower.

Between the stator and the casing of the oil-cooled permanent magnet motor is a lubricating oil cavity. In addition to cooling the permanent magnet motor, the lubricating oil also has the effect of sound insulation and noise reduction, so the oil-cooled permanent magnet motor has low noise during operation.

The protection level is high (IP65), which can better adapt to different user environments.

With intelligent control, it can record and save pressure, flow, temperature and other data at any time, and realize automatic adjustment and automatic maintenance.

The operation panel is equipped with an intelligent touch screen, which is convenient to operate and makes the operator very easy to use.

Compared with ordinary asynchronous motors, the use of synchronous motors reduces energy loss, thereby improving transmission efficiency, reducing vibration and noise, and reducing carbon emissions.

It has high efficiency power factor and high stable output power.

More Recommendations

  • 2026-04-13

    Is it better to choose oil-free or oil-free air compressor for painting

    When choosing an air compressor for spray painting, oil-free air compressor and oil-free air compressor have their own advantages and disadvantages. The specific type of air compressor to choose depends on actual needs and working conditions. The following is a detailed comparison of the two: the advantages of 1. oil-free air compressor oil-free pollution: oil-free air compressor in

    View details
  • 2026-04-14

    What is the relationship between variable frequency air compressor gas production and frequency

    There is a direct correlation between the gas production and frequency of the variable frequency air compressor. This relationship is mainly reflected in the following aspects: First, the variable frequency air compressor controls the operating frequency of the compressor by adjusting the speed of the motor. When the frequency increases, the motor speed increases accordingly

    View details
  • 2026-04-13

    The benefits of air compressor shed built in the outdoor

    The benefits of setting up the air compressor shed outdoors are mainly reflected in the following aspects: 1. environmental protection and prolonging the service life of equipment, rainproof and sun protection: the air compressor shed set up outdoors can effectively prevent rainwater from directly wetting the air compressor, reduce the risk of equipment rusting, and avoid motors at the same time.

    View details
  • 2026-04-14

    How to prevent water in compressed air in production workshop

    Water in the compressed air in the production workshop is a common problem, which may affect the production efficiency and product quality. In order to prevent the occurrence of this situation, we can start from the following aspects: 1. source control environment selection: in the selection of air compressor station, try to choose

    View details
  • 2026-04-13

    How often does the water from the air compressor drain

    The frequency of air compressor drainage depends on a number of factors, including frequency of use, ambient humidity, compressor model and operating conditions. Therefore, a fixed drainage cycle cannot be given. However, based on general experience and industry practice, the following recommendations can be given: 1.

    View details
  • 2026-04-15

    Air compressor efficiency calculation formula

    The efficiency calculation of air compressor involves many parameters and formulas, which are explained in detail as follows: 1. core calculation formula The total efficiency of air compressor (& eta;_total) is calculated by the ratio of theoretical power to shaft power, and is divided into isothermal efficiency and adiabatic efficiency: isothermal total efficiency: & et

    View details
  • 2026-04-15

    Can two air compressors supply air to one pipeline?

    Two air compressors can supply air to the same pipeline, but they need to be reasonably configured according to the equipment type, control mode and pipeline design to ensure stable and efficient operation of the system. The following is the specific analysis: 1. feasibility analysis basic conditions pressure matching: two

    View details
  • 2026-04-10

    How about oil-free variable frequency screw air compressor

    Oil-free variable frequency screw air compressor has a series of advantages, making it widely welcomed in industrial applications. First of all, due to the oil-free design, this air compressor can eliminate the risk of oil pollution in the compressed air, which is necessary to clean the oil-free air.

    View details
  • 2026-04-15

    Screw compressor and scroll compressor which is good

    Regarding the comparison of the technical characteristics of screw and scroll air compressors In the field of compressed air equipment, screw and scroll compressors have different application characteristics due to structural differences. The specific differences can be summarized as follows: Differences in working principles Screw compressors: Through Yin and Yang Turn

    View details
  • 2026-04-10

    2 cubic compressed air storage tank to be reported

    For the question of whether the 2 cubic compressed air storage tank needs to be reported, the answer depends on the design pressure of the storage tank and other relevant factors. If the design pressure of the gas storage tank is greater than 1kg (or 0.1 MPa), it needs to be reported according to relevant regulations.

    View details