2026-04-10Views：
The main reason why semiconductors require oil-free compressed gas is that any grease can contaminate the chip, which in turn affects the performance and reliability of the product. In the semiconductor chip manufacturing process, it is necessary to use oil-free compressed air to ensure the cleanliness of the production environment and avoid damage to the chip caused by pollutants such as oil. Therefore, it is essential to provide a steady stream of clean, oil-free compressed air for the semiconductor industry [1].
In addition, in semiconductor production, compressed air is used in large quantities, for example, in the process of embedding (squeezing) solder into microscopic holes in a circuit board, and if the compressed air is contaminated with oil, it may cause damage to expensive semiconductor components. Therefore, its production process requires highly professional technology and harsh and clean environment, using 0-grade oil-free compressed air, which is not only a high purity guarantee for closed production environment, but also promotes productivity improvement and reduces production losses caused by pollution [4].
Granklin Group's oil-free screw air compressors are highly praised for their excellent performance and high quality. The air compressor adopts advanced technology and materials to ensure that no oil pollution is generated during the compression process, thereby ensuring the quality and purity of the compressed air.
Factory dew point requirements are usually divided into three categories: general industrial environmental dew point requirements, precision manufacturing and special process dew point requirements, and special industry dew point requirements according to production process, product characteristics and environmental control requirements. The details are as follows: 1. general industrial environmental dew point requirements
Q: semiconductor industry with oil-free air compressor? A: semiconductor process more, the use of compressed air is inevitable. Oil-free air compressor can look at the water-lubricated oil-free air compressor of Shanghai Granklin Group. The compressed gas does not contain oil and is suitable for semi-conductive
Many consumers in the purchase of air compressor, not only to face is the choice of frequency conversion air compressor or the choice of power frequency air compressor problem, but also consider the air compressor is the choice of oil-free, oil, or micro oil, what is the difference between the three?
The durability of the air compressor does not entirely depend on whether it has oil or no oil, but is affected by many factors, including the design of the air compressor, the quality of manufacturing, the use of the environment, maintenance and so on. Therefore, it is impossible to simply answer the question of oil-free air compressor or oil-free air compressor.
In the previous advantages and disadvantages of the screw air compressor, it was said that compared with the piston air compressor, its stability is better and the vibration is relatively small, but in special cases, there will be large vibration. So what are the reasons for this? 1, machine bolts appear loose
The specific power is the "power consumption report card" of the air compressor, the smaller the better. Because the water-lubricated air compressor has low water resistance, no aging, and good heat dissipation, it is naturally easy to get a smaller specific power, which saves electricity and produces clean gas. It is a "smart and clean" choice.
The frequency of screw air compressor discharge (I. e. discharge of condensed water) should be determined according to the specific working conditions and the use of compressed air. The following are some strict considerations and suggestions: 1. working conditions Ambient temperature and humidity: When the ambient temperature is high or the humidity is high, the air
Oil-free air compressor common fault maintenance: 1, oil-free air compressor intermittent work, insufficient gas supply. The reason for this failure is: insufficient voltage. Starting from the buzzing sound, if the current running current is greater than 5: 00 a.m. (ordinary 520 watts and 840 watts without oil or oil
The maximum oil content of oil-free air compressor should be specified according to international standards and industry classification. The core conclusions are as follows: 1. international standards: Class 0 oil-free standards (oil content ≤ 0.01 mg/m & sup3;) According to international standard ISO 8573-1:2001 and equivalent standard in China
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
