2026-04-09Views：
The main difference between oil-free compressed air and oil-free compressed air is whether lubricating oil is used in the compression process. The following is a specific comparison:
use of lubricating oil:
oiled compressed air: During the compression process, lubricating oil is used to lubricate the internal parts of the compressor to reduce wear and frictional heat. The lubricating oil will mix with the air and leave a certain amount of oil mist in the compressed air.
Oil-free compressed air: No lubricating oil is used in the compression process, which avoids the influence of oil mist on air quality.
Air quality:
oil compressed air: Due to the presence of lubricating oil, the compressed air will contain a certain amount of oil, which may cause pollution to some applications.
Oil-free compressed air: higher air quality, no oil, suitable for high air quality requirements, such as food, medical, electronics and other industries.
Compressor Type:
compressed air with oil: usually reciprocating compressors or screw compressors are used. These compressors require lubricating oil during the compression process to ensure normal operation.
Oil-free compressed air: Oil-free screw compressors or centrifugal compressors are usually used. These compressors are designed without lubricating oil.
Maintenance and use costs:
oil compressed air: It is necessary to replace the lubricating oil regularly and dispose of the waste oil, and the maintenance cost is relatively high.
Oil-free compressed air: no need to change the lubricating oil regularly, and the maintenance cost is relatively low.
Regarding the water-lubricated oil-free frequency conversion screw air compressor of Shanghai Grankering Group, this product adopts water lubrication technology and does not need to add lubricating oil, so it will not produce oil and exhaust gas pollution, and meets environmental protection requirements. At the same time, the air compressor also uses permanent magnet frequency conversion technology, which can automatically adjust the operating speed of the compressor according to actual needs, avoid energy waste, and achieve high efficiency and energy saving. In addition, the product also has the advantages of stable operation, low noise and convenient maintenance.
In summary, there are obvious differences between oil-free compressed air and oil-free compressed air in the compression process. The water-lubricated oil-free variable frequency screw air compressor of Shanghai Granklin Group provides users with high-quality compressed air solutions with the characteristics of high efficiency, environmental protection and stability.
Permanent magnet screw air compressor is a combination of permanent magnet synchronous motor and screw compression technology of efficient energy-saving air compression equipment, mainly used for industrial production to provide stable, clean compressed air. Its core functions and application scenarios are as follows: 1. core function pressure
The air compressor has been working without stopping, which may be caused by a variety of reasons. The following are some possible reasons and solutions: Controller failure: Check whether the display panel of the controller is working normally. If there is any abnormality, the controller may need to be replaced.
Food-grade air compressors need to meet specific specifications and standards to ensure that the compressed air they output meets food safety requirements. Generally speaking, the specifications of food-grade air compressors may include the following aspects: Oil-free design: food-grade air compression
Air compressor flow is the core parameter to measure its gas production capacity, which refers to the volume of compressed air output by the air compressor per unit time, usually in standard cubic meters per minute (Nm & sup3;/min) or cubic meters per hour (m & sup3;/h). This indicator directly reflects the air pressure
As the core power source of fermentation process, compressed air runs through the whole process such as strain cultivation, fermentation metabolism and product separation, and its quality stability and supply reliability are directly related to fermentation efficiency and product quality.
In recent years, with the wide application of screw air compressors and the increase of market demand, oil-free screw air compressors have become more and more popular in the market. Many customers also ask questions about oil-free screw air compressors. Introduce the oil-free snail
Shanghai granklin group water lubrication oil-free air compressor maintenance guide-let energy saving and lasting and exist in industrial production, the role of air compressor can not be ignored, and choose an energy-saving and oil-free air compressor is more environmental and production benefits
When choosing an air compressor, when transitioning from an oil-injected screw air compressor to an "oil-free screw air compressor", we will always have doubts about unknown products that we do not understand ". After all, air compressor family after years of development, has produced many kinds of compressor. The "water-lubricated screw air compressor" produced by Shanghai Granklin Group is one of the "oil-free screw air compressors.
Answer: The main function of the chemical plant compressor room is to place the air compressor equipment room. Most chemical companies use oil-free air compressors and water-lubricated oil-free air compressors, which are used outside the compressor room.
Annual maintenance of oil-free air compressors is an important part of ensuring long-term stable operation, improving efficiency and extending service life. The following are the main contents of the annual maintenance of the oil-free air compressor: 1. daily inspection and records before starting up inspection: observation equipment
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
