2026-04-15Views：
As an important equipment of the medical system, the core value of the hospital air compressor is to provide clean, stable and reliable gas source through diagnosis, treatment, first aid and other links. The following from the function, application scenarios and technical characteristics of the three dimensions:
| Scene | device example | air pressure demand | gas quality requirements |
|---|---|---|---|
| first Aid and Respiratory Support | ventilator, oxygen mask | 0.4-0.6 MPa | sterile, low dew point, oil content <0.003ppm |
| surgical operation | pneumatic scalpel, hemostatic forceps | 0.6-0.8 MPa | dry, oil-free, particles <1 μm |
| dental Treatment | high-speed mobile phone, dental scaler | 0.5-0.7 MPa | low noise, stable output |
| laboratory and Pharmacy | cell incubator, X-ray irradiator | 0.5-0.8 MPa | high purity, no chemical residue |
| disinfection Supply Center | high pressure steam sterilizer | 1.0-1.2 MPa | high temperature saturated steam support |
Hospital air compressors have become an indispensable "life support power source" for the modern medical system through their stable and clean air output ". With the continuous progress of medical technology, its performance standards and intelligent level will continue to improve.
Micro-oil air compressor and oil-free air compressor, both of which are like two unique roles in the field of air compression, each has distinct characteristics and advantages. The micro-oil air compressor is like a budget-conscious engineer. While ensuring performance, it also pays attention to economy
To judge whether the air compressor is a variable frequency air compressor, it can be observed and analyzed from the following aspects: 1. appearance mark marking information: variable frequency air compressor usually marks "VSD" (Variable Speed Drive, I .e. variable frequency drive) or & l on the fuselage
The power of the air compressor in the workshop varies depending on the specific needs of the workshop, the scale of production, the type of equipment and the frequency of use. Generally speaking, the power range of air compressors for workshops can range from a few kilowatts to hundreds of kilowatts. Below is the car.
There is no definite time standard for the replacement of air compressor maintenance oil. For general mineral lubricating oil, 2000-3000 hours are recommended, semi-synthetic lubricating oil 4000-6000 hours are recommended, and fully synthetic lubricating oil 6000-8000 hours are recommended. Maintenance and replacement of lubricating oil depends not only on oil
Screw air compressor has oil injection machine and oil-free machine, oil-free air compressor domestic use is more stainless steel water lubricated air compressor. Shanghai Granklin Group is engaged in the business of stainless steel water lubricated air compressor, self-produced and self-sold. Self-produced air compressor host
In winter, the air compressor needs to take a series of protective measures to ensure its normal operation and prolong its service life. The following are some recommended winter protection measures: Maintain proper lubrication: In winter, the decrease in temperature may cause the viscosity of the lubricating oil to increase, and the lubrication
The air compressor can be set in the explosion-proof area, but the explosion-proof standards and regulations must be strictly observed. The explosion-proof standard for air compressors is a comprehensive safety standard designed to ensure that air compressors will not cause explosions when operating in flammable and explosive environments. These standards cover
As an indispensable equipment in modern industry, the price of oil-free air compressor has always been the focus of many enterprises. Among many brands, the water-lubricated air compressor produced by Shanghai Granklin Group is characterized by its unique oil-free design, excellent performance and extensive
Analysis of the application of air compressors in the die casting industry As one of the core areas of modern manufacturing, the die casting industry focuses on precision filling of liquid or semi-liquid metal into the mold cavity through high-pressure technology, and forming high-precision castings after cooling and solidification. This process is extensive.
Semiconductor components have very strict requirements on the quality of air compressed gas, mainly including the following aspects: Particle concentration: The particles in the semiconductor compressed air must be very small, and the particle concentration is usually required to be less than 100 per cubic foot, or even lower, to ensure the production environment
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
