2026-04-13Views：
The oil-free air compressor cannot be refueled. Here are a few notes about oil-free air compressors:
working principle:
oil-free air compressors do not need to use lubricating oil to lubricate mechanical parts during operation. This design ensures that the output compressed air is completely oil-free, and is suitable for applications that require extremely high compressed air quality, such as food, pharmaceutical, and electronics industries.
Type:
oil-free air compressor commonly used in two series: water lubricated oil-free air compressor, dry oil-free air compressor. For example, water lubrication oil-free air compressor in the air compressor head internal lubrication is the use of water, rather than oil, head work without oil to participate in the compressed gas is naturally oil-free.
Special design:
the oil-free air compressor uses special design and wear-resistant materials to ensure long-term stable operation without refueling. They may use high-quality bearings and seals, which have been carefully designed to reduce friction and wear.
Note:
it should be noted that although the compressed air produced by the oil-free air compressor does not bring oil into the compression process, pollutants such as oil vapor contained in the atmosphere may still exist in the compressed air. Therefore, depending on the application requirements, it may be necessary to use air treatment products to further reduce the oil content and other pollutants in the air.
In summary, oil-free air compressors cannot be refueled, and they use special design and materials to ensure a stable and reliable compressed air output without the need for lubricating oil.
The working pressure of compressed air mainly depends on its application and the required power. Generally speaking, the compressed air pressure of the factory air compression station is about 0.6~1.6 Mpa (gauge pressure), which is a relatively suitable range. However, there are also some special cases, for example, when using
Screw permanent magnet variable frequency air compressor has many advantages, so it is usually considered a good air compressor choice. The following are some of the main advantages of screw permanent magnet frequency conversion air compressor: high efficiency and energy saving: screw permanent magnet frequency conversion air compressor adopts permanent magnet frequency conversion technology, which can
Q: What is the professional category of air compressor? A: Air compressor belongs to the machinery and equipment industry. More specifically, it belongs to the compressor manufacturing industry and is a kind of general machinery. At the same time, because the air compressor involves gas compression and power transmission, it can also be classified.
In order to generate a pressure of 1.5mpa (megapascals), the discharge pressure of the air compressor needs to be greater than or equal to 1.5mpa. The specific air compressor size (such as power, exhaust volume, etc.) will also be affected by other factors, such as compressed air flow requirements, application scenarios, etc.
In the air compressor industry, permanent magnet screw air compressor has been widely concerned for its high efficiency and energy saving. When it comes to the best in this field, Shanghai Granklin Group is undoubtedly a resounding name in the industry. The group produces water-lubricated screw air compressors
The maintenance cycle of the screw air compressor varies depending on many factors, such as the type of equipment, the working environment, the frequency of use and the manufacturer's recommendations. Generally speaking, the maintenance cycle of screw air compressor can be divided into the following stages: 1. the first maintenance of newly purchased screw air compressor
The amount of moisture in the air is expressed in parts per million (ppm), which is not a fixed value, but is affected by many factors, including temperature, humidity, geographical location and climatic conditions. In the air at normal temperature and pressure, moisture
The difference between the traditional air compressor and the new air compressor is very big. The different lubrication methods have different requirements for the materials used in the air compressor. The traditional oil-free air compressor head material is lower than the new oil-free air compressor. Oil-free air compressor, especially water lubricated air compressor, must be made of stainless steel. If you encounter a process customization machine, the material requirements are higher. The material selection is determined according to customer needs.
Answer: The air tank is a drain valve, the amount of water vapor or more can use the dryer (freeze dryer, adsorption dryer), in the collocation of post-processing with precision filters, you can effectively remove the water in the compressed air.
The air compressor volume indicates the air volume index of the air compressor, which refers to the volume of compressed air that the equipment can stably output per unit time, that is, the air output. This parameter directly reflects the ability of the equipment to provide compressed air to the gas system. In the air compressor
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
