2026-04-09Views：
Q: How to remove the water vapor from the air compressor?
Answer: The air storage tank has a drain valve, and the amount of water vapor can still use a dryer (refrigeration dryer, adsorption dryer). With a precision filter for post-processing, the water molecules in the compressed air can be effectively removed.
shanghai granklin group co., ltd. specializes in "water lubricated air compressor" production, our screw air compressor is oil-free general machinery and equipment, to provide enterprises with a steady stream of clean oil-free compressed air.
Air compressors with oil and without oil are not absolutely good or bad. Their use occasions are different from those suitable for working conditions. If they are used for purging, machining, manufacturing and power, it is OK to choose air compressors with oil and slight oil, but in some occasions, oil-free air must be used.
The compressed air produced by ordinary air compressors will contain a certain amount of lubricating oil, usually between 5 mg and 50 mg per cubic meter, depending on the type of equipment, operating conditions and maintenance level. The following from a professional point of view for you to resolve: 1. oil
The machining center shall be equipped with an air compressor. The reason is as follows: the machining center is a highly automated machine tool that can perform a variety of complex machining tasks. In the process of processing, it needs a variety of auxiliary equipment to support its operation, and the air compressor is used as a compressor to provide compressed air.
When discussing the relationship between compressed air outlet pressure and workshop pressure, we must first clarify several key points. The outlet pressure of compressed air refers to the gas pressure output by the air compressor or related equipment, while the workshop pressure refers to the pressure transmitted to the various uses of the workshop.
Common Pressure Range and Application Analysis of Compressed Air 1. Common Pressure Range of Compressed Air In the industrial field, the pressure demand of compressed air varies from application scenario to application scenario, and can usually be divided into the following three levels: low pressure range (0.2-1.0 MPa) application scenario: air
If you determine the size and type of compressor, but there is a problem is the choice of oil lubrication or oil-free air compressor. Your choice on this issue should be based on the compressed air application process. Do I need an oil-free compressor? Choose
There are significant differences between air compressor oil and engine oil in terms of use, performance and requirements. Air compressor oil is mainly used for various types of machinery to reduce friction and protect the liquid lubricant of machinery and processed parts. It is mainly from lubrication, cooling, rust prevention, cleaning
Air compressors are widely used in many industrial and commercial fields. The following are some types of companies that need to use air compressors: Manufacturing: In manufacturing, air compressors are widely used in various processes, such as pneumatic tools, automation equipment, packaging machinery
Whether the air compressor in the brick factory runs 24 hours or not depends on many factors, including but not limited to the type of air compressor, design, manufacturing process, cooling system, maintenance and working environment. The following is a detailed analysis of this problem: air compressor
There may be many reasons for the high temperature of the cold dryer (freeze dryer). The following are some common factors and their solutions: 1. refrigerant problem Refrigerant shortage or fluorine leakage: The refrigeration effect of the cold dryer is closely related to the amount of refrigerant. If the refrigerant is insufficient or there is leakage of fluorine,
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
