2026-04-09Views：
Q: How to choose air compressor in food industry?
answer: food production can choose "shanghai granklin air compressor".
The "screw air compressor" produced by Shanghai Granklin Group is an oil-free air compressor, the air compressor head is made of stainless steel, and the lubrication method is to use water as a lubricant.
Compressed gas has a wide range of applications, and there are many cases to be investigated in medical, chemical, electronic, semiconductor, food, textile and other fields.
Shanghai Granklin Group Co., Ltd. specializes in the production of "water lubricated air compressors". Our screw air compressors are oil-free general machinery and equipment, providing a steady stream of clean and oil-free compressed air for enterprises in the food processing industry.
The time to change the oil of a new air compressor depends mainly on the type of oil used and the manufacturer's recommendations. Generally speaking, the newly purchased air compressor should be replaced with new oil after 500 hours of operation for the first time. Subsequently, the replacement cycle varies depending on the oil type: mineral oil
The air compressor is oil-free, but the specific choice should be judged according to the actual demand and application scenario. The following is a brief description of the oil-free air compressor: The oil-free air compressor avoids the use of lubricating oil to ensure the purity of the compressed air. This is
A large capacity oil-free air compressor is a device that can provide large capacity oil-free compressed air. This type of compressor is typically used in applications that require a large amount of pure, oil-free compressed air.
在食品行业中，压缩空气的质量标准对于确保食品安全至关重要。以下是对食品压缩空气等级及标准的重新组织语言改写，力求用词严谨：一、食品压缩空气等级概述食品压缩空气等级通常
Professional Description of Working Pressure Setting of Air Compressor The setting of working pressure of air compressor requires comprehensive evaluation of equipment performance, gas demand and operating cost. There is no absolute advantage or disadvantage, but the principle of "on-demand adaptation" should be followed. The following from the technical characteristics, economic
The air pressure standard of the factory is not a fixed value, but is adjusted according to the specific equipment requirements and production process. The following is a detailed explanation about the general air pressure of the factory: the air pressure standard of the factory air compressor: generally speaking, the air pressure of the factory air compressor
Air compressors are widely used in many industries. The following are some major industries and their specific application scenarios: Industrial manufacturing: Automobile manufacturing: Air compressors are used for parts assembly, sealing, molding, and pneumatic tools (such as pneumatic Wrenches, pneumatic drills) power source
To calculate the intake air volume of the air compressor, you can follow the following steps: determine the exhaust volume of the air compressor: exhaust volume refers to the volume of compressed air discharged by the air compressor per unit time, usually in cubic meters per minute (m & sup3;/min) or cubic feet per minute (c
In the salt spray test, the oil content of compressed gas should be strictly controlled within 0.01 mg/m & sup3;. This standard is formulated according to ISO 8573-1 compressed air quality grade. The specific analysis is as follows: The core of 1. oil content control is based on international standards (ISO 8573-1) The standard
The first maintenance of the air compressor is usually recommended after 500 hours of operation. The parts that need to be replaced in this maintenance include the oil filter, air filter element and lubricating oil. Such maintenance can ensure the normal operation of the air compressor and extend its service life.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
