2026-04-10Views：
Oil-free air compressor will automatically stop under certain pressure. The main reasons are as follows:
overheat protection: The internal temperature of the oil-free air compressor will rise after working for a long time. For the safety and stability of the equipment, most oil-free air compressors are equipped with overheat protection systems. Once the internal temperature of the equipment is too high, the system will automatically stop to prevent equipment damage.
Overload protection: The load size of the oil-free air compressor will affect the working efficiency and service life of the equipment. When the load is too large, it will cause the equipment to overheat and malfunction. Therefore, oil-free air compressors are usually equipped with overload protection systems. Once the equipment exceeds its load range, the system will automatically stop.
Pressure regulation and protection: The pressure regulation of oil-free air compressors is usually completed by adjusting the pressure switch. When the gas pressure exceeds the set value, the pressure sensor will send a signal to make the relay turn off the air compressor motor, so as to control the gas pressure within a certain range. This mechanism also ensures that when the pressure reaches a certain level, the air compressor will automatically stop to prevent damage caused by excessive pressure.
In summary, the oil-free air compressor will automatically stop under a certain pressure, which is mainly for the protection of the equipment to prevent equipment damage or failure caused by overheating, overload or excessive pressure. These automatic shutdown mechanisms ensure the safe, stable and efficient operation of oil-free air compressors.
Whether the air compression station needs to consider explosion-proof depends mainly on the environment and specific safety requirements of the air compression station. First of all, if the air compression station is located in an environment with flammable gases or dust, such as special places such as coal mines, then explosion-proof measures are particularly important.
Oil-free compressors and oil-free compressors have their own advantages and applicable scenarios, so it is impossible to simply judge which one is "best", but needs to be selected according to specific application requirements. Advantages of oil-free compressors Environmental protection: oil-free compressors in the compression process
Whether the compressed air tank belongs to special equipment depends on its design pressure and volume. According to publicly released information, only industrial compressed air tanks with a design pressure greater than 0.1MPa are regarded as special equipment and need to be managed in accordance with specific laws and regulations.
When looking for an efficient and environmentally friendly oil-free screw air compressor, Shanghai Grankering Group is undoubtedly a choice worth considering. The group focuses on the research and development, design, production and sales of oil-free screw compressors. It has independent intellectual property rights and is a national high-tech enterprise
Screw air compressor as a wide range of general machinery, is used in all aspects of production. According to the different lubrication methods, it can be divided into oil-free air compressor and oil-free air compressor. What is the difference between the two? 1. the oil content is different, the air compressor has
Description of compressed air disinfection and sterilization compressed air itself does not have the function of active disinfection and sterilization. Its essence is obtained by mechanical compression of the gas, does not contain disinfection ingredients, can not directly kill microorganisms (such as bacteria, viruses, etc.). If it is necessary to realize the elimination of compressed air
At present, most domestic cities use centralized landfill or incineration for garbage disposal. Compared with landfill methods that are easy to pollute the soil, waste incineration treatment is more conducive to reducing the volume of waste and eliminating various pathogens. Moreover, with the sustainable construction of society
The quality requirements of compressed air in different industries vary significantly due to different application scenarios and safety standards, mainly reflected in core indicators such as cleanliness, dryness, oil content, microbial control, and gas composition stability. The following are specific industry requirements
The difference between power frequency and variable frequency screw air compressor is mainly reflected in the following aspects: power frequency screw air compressor variable frequency screw air compressor working principle The motor speed is constant, and the exhaust volume is controlled by adjusting the opening of the intake valve. When used
On the nameplate of the air compressor, the three parameters of maximum displacement, pressure and temperature are all important indicators to describe the performance and working conditions of the air compressor, and there is a close relationship between them. Maximum displacement: It refers to the rated speed of the air compressor and a certain
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
