2026-04-10Views：
Low oil pressure in dry oil-free air compressors may be caused by a variety of factors. The following are some possible reasons:
oil shortage: oil shortage is the direct cause of oil pressure drop. When the amount of oil in the air compressor is insufficient, the system cannot build up sufficient oil pressure, resulting in low oil pressure. At this time, it is necessary to add the corresponding oil to the machine in time to ensure that the quality of the oil meets the requirements.
Oil blockage: If the oil circuit of the air compressor is blocked, the oil flow is blocked, which will also cause the oil pressure to decrease. In this case, it is necessary to clean the oil circuit to remove impurities such as grease and dirt to ensure smooth oil.
Parts damage: some parts inside the air compressor, such as pressure regulating valve, exhaust valve, etc., if damaged or failed, may also cause the oil pressure to decrease. The damage of these parts will affect the normal flow of oil and pressure control, resulting in unstable or reduced oil pressure. At this time, damaged parts need to be replaced in time.
It should be noted that dry oil-free air compressors usually do not use oil as a lubricant, but use other methods (such as the use of water or other special lubricating materials) for lubrication. Therefore, when referring to "oil pressure", it may refer to the hydraulic or pneumatic system associated with the air compressor. If the air compressor is indeed designed as an oil-free system, the problem of low "oil pressure" may actually refer to the pressure drop of the air pressure or hydraulic system.
In summary, the low oil pressure of the dry oil-free air compressor may be caused by insufficient oil, blockage of the oil circuit or damage to parts. In order to solve this problem, it is necessary to carry out investigation and maintenance according to the specific situation.
The maintenance cycle of a screw air compressor depends on many factors, including the type of equipment, the working environment, the frequency of use, and the manufacturer's recommendations. The following is a comprehensive maintenance cycle guide based on a variety of information: 1. the first maintenance cycle of a new machine:
The maintenance cycle of the new air compressor can be determined according to different situations. The following are some general guidelines: First maintenance: It is usually recommended that the new air compressor be maintained for the first time after 500 hours of operation. This maintenance is relatively simple, mainly to change the oil,
The air in the icu ward is not only used for breathing, it also powers various life-saving equipment and acts as a barrier to isolate external pollution. The water-lubricated air compressor is becoming an increasingly important air supply option in this scenario with extremely high air quality requirements because the output air is oil-free and cleaner.
The advantages and disadvantages of permanent magnet variable frequency air compressor are in the era of energy saving. No matter what kind of products we choose, we will include its energy saving effect as a reference value for purchasing. In the past two years, a new type of permanent magnet variable frequency air compressor has been developed in the field of air compressors.
The difference between the traditional air compressor and the new air compressor is very big. The different lubrication methods have different requirements for the materials used in the air compressor. The traditional oil-free air compressor head material is lower than the new oil-free air compressor. Oil-free air compressor, especially water lubricated air compressor, must be made of stainless steel. If you encounter a process customization machine, the material requirements are higher. The material selection is determined according to customer needs.
The oil content of the air output of the oil-injected screw air compressor needs to be evaluated in combination with industry characteristics and process requirements. The oil-injected screw air compressor realizes cooling, sealing and lubrication functions by injecting lubricating oil, so a trace of oil will remain in the compressed air. Its oil content level is affected
In the production process of washing and protecting daily chemicals, compressed air is mainly used to drive pneumatic equipment, stir raw materials, transport materials and product packaging. In order to ensure product quality and production safety, compressed air must meet the requirements of cleanliness, dryness, oil content, microbiological
In the era of industrial manufacturing that pursues high efficiency and environmental protection, oil-free compressed air has become an indispensable key element in many high-end fields. Shanghai Granklin Group, as a leader in the industry, with its innovative water-lubricated screw air compressor products, leading the oil-free
Air compressor blowing out of the gas containing moisture is a relatively common problem, which may be due to a variety of reasons. In order to solve this problem, the following measures can be taken: 1. check and maintain the drainage system to discharge condensate regularly: in the air compressor's gas storage
The oil content at the outlet of the screw air compressor is a key indicator to measure its performance and compressed air quality. The following from the standard range, influencing factors and control methods of three aspects of detailed answers: 1. screw air compressor export oil content of the standard range according to industry standards and systems.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
