2026-04-09Views：
Q: What is the potential safety hazard of small reciprocating compressors under pressure?
Answer: Starting with pressure will increase the starting load of the motor, which has a great impact on the motor and is easy to burn out the motor or cable. Light overload jump, heavy quickly cause burning tile accident.
If moisture appears in the new air compressor, the following steps can be taken to deal with it: Open the drain valve: There is usually a drain valve at the bottom of the air compressor cooler. Open the drain valve in time to drain the water inside. If the air compressor is stored
Service life and safety assessment of air compressor air storage tank As a pressure equipment, the safety of air compressor air storage tank is directly related to production and personnel safety. Whether the gas tank can continue to be used after more than ten years of use requires a comprehensive assessment of the equipment status, regulatory requirements and
Excessive water on the ground of the screw air compressor will have many adverse effects, mainly including the following: 1. affect the normal operation of the equipment, the compression efficiency is reduced: the water will occupy a certain space inside the air compressor, which may lead to the reduction of the compression efficiency of the equipment. When accumulated water
The air compressor itself does not require direct use of water during operation. However, in some particular applications or systems, water may be involved in the operation of the compressor in different ways. First of all, it needs to be clear that common air compressors, such as pistons
Permanent magnet air compressor is a kind of air compressor driven by permanent magnet motor, which has the advantages of high efficiency, energy saving and stability. In the market, there are many brands that provide permanent magnet air compressor products, and each brand has its own characteristics and advantages. For the Shanghai Granklin set
In the production of semiconductor materials, compressed air plays a role in ensuring process stability and product quality by providing clean power, precisely controlling the environment, achieving efficient cleaning and cooling, ensuring the operation of vacuum systems, and supporting automated and intelligent production.
The appropriate air pressure of the air compressor used in the factory shall be determined comprehensively according to the equipment requirements, process requirements and energy efficiency balance. The following are specific suggestions and industry cases: 1. conventional air pressure range low pressure application (0.4-1.2MPa): applicable scenario: light pneumatic tools (such as pneumatic screwdriver
During the operation of the air compressor, excessive water vapor is a common problem. It not only affects the operating efficiency of the air compressor, but also may cause damage to the equipment. To solve this problem, the water-lubricated screw air compressor of Shanghai Grankering Group provides an effective solution. Transmission
Air compressor permanent magnet refers to a motor that uses permanent magnet materials to generate a magnetic field, which is used to drive the rotor of the air compressor to run and achieve the purpose of compressing air. Compared with the traditional AC induction motor, permanent magnet motor has the advantages of high efficiency, miniaturization and energy saving. This empty.
In the process of using the screw air compressor, some factories will have insufficient gas supply. In fact, the selection of the machine, air leakage, gas production standards, machine wear and other aspects may produce insufficient gas supply, resulting in the production workshop equipment can not operate normally.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
