2026-04-15Views：
Analysis and Selection Suggestions of Specific Power of Air Compressor
specific power it is a key indicator to measure the energy efficiency of the air compressor, which refers to the ratio of the power consumed by the equipment to the gas production in the production of compressed air per unit time. Generally speaking, the lower the specific power, the less electricity is required to produce per cubic meter of compressed air, and the more energy-efficient the operation of the equipment.
Specific power is not the smaller the better, need to be combined with actual demand judgment:
Granklin water lubricated single screw air compressor through efficient water lubrication design and single screw-star wheel compression technology, while ensuring stable gas production, to achieve a lower specific power, to help users balance energy consumption and production needs. It is recommended to select equipment that adapts power according to actual gas consumption, operating time and energy costs, not only to avoid idle resources, but also to ensure long-term economic benefits.
Granklin has always focused on technological innovation and is committed to providing users with more efficient and environmentally friendly compressed air solutions.
Answer: Oil-free air compressor common faults and maintenance methods? Answer: Oil-free air compressor common faults include: Leakage: check the gas supply pipeline, one-way valve, safety valve, pressure switch and other joints are leaking, if found gas leakage sound, must be timely
Q: oil free screw air compressor and oil injection screw air compressor which is good? A: air quality comparison is better without oil screw air compressor. If no preconditions are added, the oil injection screw air compressor is of course selected in terms of price and exhaust volume, but why is it now
The units of the vibration value of the air compressor are usually the following, which are used to measure different aspects of vibration: speed (mm/s): the amount of vibration of the air compressor is commonly expressed in speed values, and the unit is mm/s (mm/s). According to international standards, mechanical equipment
The oil content of the compressed air of the oil-free air compressor can reach level 0. According to industry standards such as ISO 8537-1 or ISO 8573-1, Class 0 requires an oil content of less than 0.01 mg/m & sup3;, which is usually considered equivalent to the oil content grade of oil-free compressed air.
The pressure of the fermentation compressed air usually has a certain range. In fermentation production, the use of compressed air pressure range is generally between 0.4 ~ 0.6MPa. However, different fermentation equipment may have slightly different pressure requirements, so in actual operation, it is necessary
The advantages and disadvantages of continuous or intermittent operation of air compressors need to be comprehensively evaluated in combination with specific usage scenarios. The following is a technical analysis: 1. the economic advantages of applicable scenarios for continuous operation. Frequency conversion models: when the load rate is above 70%, continuous operation saves about 3 energy than frequent start-up and stop
There may be many reasons for the slow speed of the screw air compressor. The following are some common reasons and corresponding solutions: 1. motor problems Motor damage or lack of lubrication: If the motor of the screw air compressor is damaged or lacks lubrication, the speed will be slow. Solution: check the electricity
During the operation of the air compressor, excessive water vapor is a common problem. It not only affects the operating efficiency of the air compressor, but also may cause damage to the equipment. To solve this problem, the water-lubricated screw air compressor of Shanghai Grankering Group provides an effective solution. Transmission
Oil-free scroll compressors can indeed be used for gas transfer. The oil-free scroll compressor is a kind of positive displacement compressor. Its working principle is to compress through two intermeshing scrolls (a fixed scroll and an eccentric swirling and flat scroll).
Air compressor can be used at rated flow, but the specific use of the situation also need to consider a number of factors. First of all, the rated flow of the air compressor is the gas compressed and discharged per minute under the standard state (usually the gas temperature is 20 ℃, the relative humidity is 0, and the pressure is atmospheric pressure).
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
