2026-04-13Views：
The oil content of the compressed air of the oil-free air compressor can reach level 0. According to industry standards such as ISO 8537-1 or ISO 8573-1, Class 0 requires an oil content of less than 0.01 mg/m & sup3;, which is usually considered equivalent to the oil content grade of oil-free compressed air. Oil-free air compressors are designed and manufactured with special lubrication methods and materials, such as resin material lubrication or other special lubrication methods, to ensure that the air generated during the compression process is almost free of oil.
Specifically, the oil content of oil-free air compressors is usually 0.01ppm, which is a very low oil content. In some special applications, such as hospitals, laboratories, schools and other institutions, due to the higher requirements for air quality, they prefer to use oil-free air compressors, such as water-lubricated screw air compressors produced by Shanghai Granklin Group.
In addition, there is a completely oil-free air compressor, which does not use oil lubrication, but completely avoids the use of oil, so there is no oil in the final exhaust gas. This kind of air compressor has a wide range of applications in food, medicine and other industries that require high purity compressed air.
Therefore, the compressed air oil content of the oil-free air compressor can reach the Class 0 standard.
Analysis of air compressor power source: technical characteristics and application scenarios of electric drive and fuel drive As the core equipment in the industrial field, the choice of power source is directly related to the operating efficiency, cost and environmental protection performance of the equipment. According to the current technical standards and
Yes, the air compressor needs to discharge water every day. Under normal operation, the air compressor needs to discharge water once a day to remove the accumulated moisture inside the equipment. If the ambient humidity is high or the water content in the air is high, the frequency of water discharge needs to be increased to avoid moisture damage to the equipment
When discussing the relationship between compressed air outlet pressure and workshop pressure, we must first clarify several key points. The outlet pressure of compressed air refers to the gas pressure output by the air compressor or related equipment, while the workshop pressure refers to the pressure transmitted to the various uses of the workshop.
The application of compressed air in the fermentation industry is very extensive and important, mainly reflected in the following aspects: Power drive: The production process of the fermentation industry requires a steam turbine to drive the air compressor to provide the compressed air required for the fermentation equipment. So
The maintenance cycle of an air compressor usually depends on a number of factors, including the operating environment, operating time, load conditions, and manufacturer's recommendations. Generally speaking, most air compressors need to be maintained at the following intervals: Daily inspection: simple every day
The machining center shall be equipped with an air compressor. The reason is as follows: the machining center is a highly automated machine tool that can perform a variety of complex machining tasks. In the process of processing, it needs a variety of auxiliary equipment to support its operation, and the air compressor is used as a compressor to provide compressed air.
In the air compressor market, oil-free air compressors and oil-free air compressors are two common types. There are significant differences in their working principles, application scenarios, and environmental performance. Take the water-lubricated screw air compressor produced by the Glanklin Group as an example.
The core difference between the oil jet compressor and the oil-free compressor is in the field of industrial compressed air, and there are significant differences between the oil jet compressor and the oil-free compressor in terms of lubrication, compressed air quality, maintenance costs and applicable scenarios due to differences in design principles. Lattice
Air compressors are widely used in many industries. The following are some major industries and their specific application scenarios: Industrial manufacturing: Automobile manufacturing: Air compressors are used for parts assembly, sealing, molding, and pneumatic tools (such as pneumatic Wrenches, pneumatic drills) power source
As a high-precision processing equipment, the five-axis machining center has extremely strict quality requirements for compressed air, involving multiple key parameters such as pressure, purity, and dryness. The following from the technical requirements, testing standards and application impact of the three dimensions of the description: the core quality of the 1..
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
