2026-04-15Views：
Instructions on whether oil-free air compressor can use oil
granklin water lubricated single screw air compressor uses water as the core lubricating medium, and realizes gas compression through the cooperative movement of single screw and star wheel. The design principle has completely replaced the traditional oil lubrication mechanism, and there is no lubricating oil in the compression chamber, so there is no need for oil system support.
Starting from the technical characteristics, the equipment is in normal operation. It is not recommended to add any form of lubricating oil. The reasons are as follows:
In daily maintenance, it is recommended to strictly follow the requirements of the equipment manual and regularly check the wear of the waterway circulation system and star wheel. In case of special conditions need to adjust the operating parameters, you can contact the professional service team to develop a solution, do not add non-designed media.
Granklin air compressor will continue to ensure efficient and stable operation of equipment with technological innovation, helping users to achieve oil-free compressed air demand.
The use of the air compressor's cold dryer (freeze dryer) is mainly reflected in the following aspects: 1. remove moisture and impurities Principle: The cold dryer uses the refrigerant to exchange heat with the compressed air to condense the moisture in the compressed air, So as to achieve the purpose of drying. Same
Q: scroll type and screw type which is the most advanced? A: scroll type and screw type air compressor have their own advantages and scope of application, can not simply judge which is more advanced. The principle of scroll air compressor determines that it can only be used in small models (15KW and below)
In industrial production, air compressor has become an indispensable key equipment for many production lines with its efficient and stable performance. Among them, the variable frequency air compressor has been favored by more and more enterprises because of its ability to accurately adjust the output according to the actual demand and the characteristics of high efficiency and energy saving.
The oil replacement cycle of an air compressor usually depends on the type of oil and the environment in which it is used. Generally speaking, mineral oil is recommended to be replaced every 5000 kilometers or half a year, semi-synthetic oil is recommended to be replaced every 6 to 8 months, and fully synthetic engine oil is recommended to be replaced every 8000-10000kg
The size of the common air pressure in the factory depends on the specific application scenario and requirements. In general, the factory normal air pressure usually refers to atmospheric pressure, I .e. standard atmospheric pressure, the value of which is defined as 101325 Pa pascals (Pa). However, in practical applications, the actual air pressure of the factory can be
In the lithium battery industry, the application of compressed air runs through multiple core links from raw material processing to battery assembly, and its importance is no less than power supply. The following are the six key application scenarios and technical details of compressed air in the lithium-ion industry: 1. electrode material preparation stage
When choosing between an oil-free air compressor and an oil-free air compressor, it is actually like choosing a "right-hand man" who must meet the needs of the work and conform to the trend of environmental protection ". Both have their own merits, the key is which is more suitable for your actual needs.
The automatic shutdown pressure value of the air compressor is not static, but is carefully set according to the specific model and use scenario of the air compressor. The following is a summary of the shutdown pressure value of the air compressor under different conditions: 1. General conditions Ordinary air compressor: its working pressure range
Inpolar regulation of screw compressors is not equivalent to variable frequency regulation, although they may have similar effects in some respects. The infinite adjustment is mainly to change the capacity of the compressor by adjusting the slide valve position of the screw compressor, so as to realize the output pressure
The problem of water in the air compressor gas can be caused by a variety of reasons. First, when air is compressed, the water vapor in it may condense into liquid water. This is because the water vapor in the air reaches a saturated state during the compression process, which in turn forms water droplets. its
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
