2026-04-10Views：
The size of the common air pressure in the factory depends on the specific application scenario and requirements. In general, the factory normal air pressure usually refers to atmospheric pressure, I .e. standard atmospheric pressure, the value of which is defined as 101325 Pa pascals (Pa). However, in practical applications, the actual air pressure of the factory may be affected by factors such as geographical location, altitude, climatic conditions, and the internal environment of the factory.
For the air pressure of the air compressor in the factory, in general:
the general air pressure range of the factory air compressor is between 0.6 ~ 1.0MPa, and it is also said that the working pressure of the industrial air compressor is generally about 7 ~ 10bar, which is equivalent to 0.7~1.0MPa.
In general factory production, in order to meet different levels of work requirements, such as impact, cutting, clamping, etc., the commonly used air pressure range is 0.6~0.8MPa, and it is also said that it is 6 ~ 8bar.
In some specific fields, such as aerospace, due to the very high requirements for components, air compressors need to provide higher air pressure, the air pressure range may be 10 ~ 14bar, that is, 1.0~1.4MPa.
In the field of medical and health care, the air pressure range of the air compressor output is relatively low, generally 7 to 8bar, that is, 0.7 to 0.8MPa, to ensure the requirements of medical gas flow and purity.
In addition, for industrial air compressors, the output pressure range is usually between 5 and 13bar (that is, 500 to 1300kPa or 72.5 to 188.5psi), because most industrial applications, such as pneumatic tools, mechanical operation, process control, etc., All need to work within this pressure range.
In general, the size of the common air pressure in the factory should be determined according to the specific application requirements and the type of equipment used. In practical applications, it is recommended to refer to the instruction manual of the equipment or consult a professional technician to determine the appropriate air pressure range.
The replacement cycle of the three filters of the air compressor can be determined according to different filters and specific usage. The following are some general guidelines: Air filter: Non-original general use time is 2000 hours, but it can be based on actual air quality and
The power of the air compressor is related to its compression capacity (displacement), but it is not the only determinant. A 20m & sup3; displacement air compressor, its power is also affected by other technical parameters such as working pressure, compressor type (such as piston type, screw type, etc.)
Water lubricated air compressor, the name sounds very interesting, like putting "water shoes" on the air compressor to make it more smooth and labor-saving in work. So, whether the friend who wears water shoes needs to be equipped with a water tank?
Scroll machine and screw machine are two common models in the field of compressed air. The core difference lies in the compression principle, applicable scene and operating characteristics. Granklin water lubricated single screw air compressor adopts the structure of single screw plus star wheel, which belongs to the category of screw machine, and its design advantages can be
The oil-free standard for compressed air is based primarily on ISO 8573-1. According to this standard, the highest grade of oil-free compressed air, Class 0, requires an oil content of less than 0.01 mg/m & sup3;. In addition, different application areas have oil-free standards for compressed air.
The compressed air in contact with traditional Chinese medicine shall meet the core standards of oil-free, dry, clean and sterile. The specific requirements are as follows: 1. oil-free requirements Oil control: compressed air shall not contain impurities such as lubricating oil to avoid polluting traditional Chinese medicine. Generally, the oil content is extremely low, such as less than 0
Q: water lubrication oil free screw variable frequency air compressor which is good? A: Shanghai granklin (group) co., ltd. Shanghai Granklin (Group) Co., Ltd. is located in Shanghai Baoshan District Robot Industrial Park, covering an area of 60 acres. It is a company with independent intellectual property rights.
The replacement cycle of air compressor lubricating oil is not fixed, but is affected by many factors, including the type of lubricating oil, the type of air compressor, the working environment and the frequency of use. The following is a detailed summary of the air compressor lubricating oil replacement cycle according to different situations
Whether the compressed air tank belongs to special equipment depends on its design pressure and volume. According to publicly released information, only industrial compressed air tanks with a design pressure greater than 0.1MPa are regarded as special equipment and need to be managed in accordance with specific laws and regulations.
In the process of chip processing, nitrogen plays an important role in many process links. The following are the main processes that require nitrogen in chip processing: 1. Packaging and transportation purposes: During chip packaging and transportation, nitrogen is used to seal the device to prevent oxidation and
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
