2026-04-09Views：
Q: air compressor and compressor the same?
Answer: It's not the same
although the names of the two are similar and even the names are not different, there is a big difference in application scenarios.
For example, the compressors used in refrigerators and air conditioners are completely different from the compressor heads used in screw and piston air compressors.
Air compressor is mainly compressed all kinds of gases such as hydrogen, nitrogen, chlorine, argon, oxygen and so on.
In semiconductor manufacturing, compressed air as a key power source and process medium, through the wafer preparation, precision cleaning, lithography, etching, film deposition, ion implantation, packaging testing and other core links, its role can be summarized as follows: 1. environmental control and engineering
The national standard for the oil content of the micro-oil air compressor is a very important topic! Imagine that if the oil content of the air compressor is too high, it is like eating too much greasy food for the machine, which will not only affect its health, but also cause a lot of hemp to the production environment.
0.01 g/m & sup3; The moisture content of the air coming out of the cold dryer is usually not more. However, please note that the air outlet pressure dew point of the cold dryer is 2~10 ℃ at 0.7 Mpa, which is equivalent to the atmospheric pressure dew point of -23 ~-16 ℃, and the water content at this time is about 0.82~1.48 g/m & sup3;.
The difference between oil-free and oil-free air compressors is mainly reflected in the following aspects: Compressed air quality: The compressed air produced by oil-free air compressors does not contain oil, so it is suitable for applications that require high-purity gas, such as breathing, spraying, and semiconductors Manufacturing etc.
The oil content of air, especially the oil content of compressed air, is an important index to measure the oil content in the air. The main units are as follows: 1. mg/m & sup3;(mg per cubic meter) mg/m & sup3; is a unit of absolute value, used to describe the unit
Screw air compressor has twin screw air compressor and single screw air compressor, motor power from 5.5-250KW between granklin group in the production. At present, the main product is water-lubricated screw air compressor, which is widely used in bottle blowing and pharmaceutical industry. Water lubrication means that when air is sucked in the rotor chamber, water is also sucked in (to lubricate the rotor and seal), and the water and air are mixed together and compressed.
View detailsIt is a common problem that the compressed air produced by the air compressor contains moisture, which may cause damage to the production line and pneumatic tools. Here are some ways to solve the moisture problem of the air compressor: Install the post filter: At the outlet of the air compressor install an efficient
Compressed air regulations and standards mainly refer to national or regional regulations, codes and standards related to the design, installation, operation, maintenance and safety of compressed air systems. These standards are designed to ensure the energy efficiency, reliability, safety and safety of compressed air systems.
Analysis of oil content of oil-injected screw air compressor: standard, influencing factors and optimization scheme 1. oil content standard and industry requirements The oil content of compressed air of oil-injected screw air compressor usually needs to be controlled within 3ppm(3 mg/m & sup3;), but the specific standards vary according to the application scenario: general
The water quality required for the oil-free water lubrication screw air compressor has specific requirements to ensure the normal operation of the air compressor and extend its service life. The following is a detailed summary of water quality requirements: purity: water should not contain a large number of suspended solids, minerals, micro
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
