2026-04-10Views：
In the field of air compressors, PPM(Parts Per Million) is usually not a parameter used to directly describe the performance of air compressors. However, in the quality detection of compressed air, PPM is an important indicator. It is a representation of volume concentration, which is used to quantify the volume content of impurities (such as water, oil or other pollutants) in compressed air.
For example, when it is said that the oil content of compressed air is X ppm, it means that out of one million parts of air, there are X parts of oil. Therefore, the lower the PPM value, the purer the compressed air. Low PPM is critical in pharmaceutical, food, electronics and other industries with stringent air quality requirements.
In addition, PPM is sometimes used to describe the failure rate of equipment, that is, the failure rate of one in a million, but this is used in the field of equipment reliability and quality management, and has little to do with the direct description of air compressor performance.
In the process of air compressor selection and operation, understanding and controlling the PPM value in compressed air is essential to ensure the efficiency of the production process and product quality. Therefore, choosing an air compressor with a high-efficiency filtration and dehumidification system and regular maintenance and replacement of filter elements are effective methods to reduce the PPM value.
In the choice of air compressor, centrifugal and screw are two common types. According to the demand of air consumption, the following are some suggestions to help you determine which type of air compressor to choose: 1. The stability and fluctuation of air consumption centrifugal air compressor:
The single screw compressor consists of a cylindrical screw and two symmetrically arranged planar star wheels, which are installed in the casing. The screw groove, the inner wall of the casing (cylinder) and the star gear teeth form a closed volume. The power is transmitted to the screw shaft, and the star wheel is driven by the screw to rotate.
View detailsThe requirements of clean air for fermentation are mainly related to air cleanliness, temperature, humidity, airflow speed and air pressure, which have an important impact on the stability of the fermentation process and product quality. Air cleanliness: in order to prevent microbial contamination, fermentation
The pressure generated by the compressor is not fixed, but is determined according to the specific compressor type, design specifications and application scenarios. In general, the compressor can provide a wide range of pressure, from small household compressors produced relatively
The ppm of air oil content represents the trace concentration of oil in the air, I .e. the amount of oil per million parts of air. Ppm is the abbreviation of English part per million, which means one part per million. Specifically, if the oil content in the air is X ppm, then
When choosing an air compressor, both oil-free air compressor and oil-free air compressor have their own advantages and applicable scenarios. Here are some comparisons of the two to help you make a decision: Oil-free air compressor Advantages: High air quality: Oil-free air compressor in the compression process
When looking for an efficient, environmentally friendly, oil-free screw air compressor, Shanghai Granklin Group is undoubtedly a reliable choice. The water-lubricated screw air compressor produced by the group stands out in the market with its unique technical advantages and excellent performance. Water
Cold dryer and air compressor are not special equipment. Special equipment refers to boilers, pressure vessels (including gas cylinders, the same below), pressure pipes, elevators, lifting machinery, passenger ropeways, large-scale amusement facilities and special facilities in the field (factory) that involve life safety and are more dangerous.
The normal negative pressure value of the air inlet of the air compressor should generally be between 0.5 and 0.7bar. This range can ensure the normal operation of the air compressor and avoid overheating or overpressure. At the same time, the limit value of the suction negative pressure of the air compressor is about-50kPa (I .e. -0.5bar), but the actual
Permanent magnet variable frequency air compressor is a new type of air compression equipment combining permanent magnet synchronous motor technology and variable frequency drive technology. Granklin water lubricated single screw air compressor has mature application capability in this field. Its core principles and advantages are as follows: 1. Permanent magnet synchronous motor
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
