2026-04-09Views：
Q: What type of air compressor is used in semiconductor industry?
A: The semiconductor industry requires highly clean oil-free air.
The water-lubricated oil-free air compressor produced by Shanghai Granklin Group has many cases in the semiconductor industry.
As a manufacturer of water-lubricated oil-free air compressors for many years, granklin, a semiconductor enterprise, has rich experience in gas demand and can provide you with a good configuration from oil-free air compressors to post-processing equipment configuration and installation.
The air compressor flow rate is how much gas this machine can spit out per minute. You can understand it as the water output of the faucet, but it is not water, but compressed air.
Air compressor this little expert, really very remarkable! How many kilograms of pressure can it hit? In fact, it depends entirely on the type and specifications of the air compressor. In general, the pressure range of the air compressor is between 7 and 13kg, which is a relatively common low-pressure air.
The maintenance required for 2000 hours of operation of the air compressor is a comprehensive task designed to ensure the normal operation of the equipment, extend the service life and improve work efficiency. The following is a detailed summary of the maintenance work that needs to be carried out after the air compressor runs for 2000 hours: 1. routine
The use of air compressor is as follows: 1. before the operation of air compressor, the following problems should be paid attention to: 1. Keep the lubricating oil in the oil pool within the scope of the scale. Before the operation of air compressor, the oil quantity in the oil injector should not be lower than the scale line value. 2. Inspection
Q: oil-free scroll air compressor features advantages? A: oil-free operation, to ensure that the compressed air is pure. The scroll design makes the compression more efficient. The maintenance of the oil-free scroll air compressor is relatively simple, which reduces the failure rate of the equipment. Low maintenance costs, only
The slow pumping of air compressor may be caused by many factors. The following is an analysis of the reasons from three aspects of equipment problems, improper use and insufficient maintenance, and solutions are provided: 1. equipment problems. Reasons for poor sealing of valve plate: long-term operation leads to wear of valve plate, air leakage on sealing surface, and reduction of exhaust
The difference between 8kg air compressor and 5kg air compressor is mainly reflected in the exhaust pressure, application scenarios and possible energy consumption differences. The following is a detailed summary of these differences: Exhaust pressure: 8kg Air compressor: Its exhaust pressure is 8kg, also
Q: 1m & sup3; How much mpa is the air compressor? Answer: The pressure of the air compressor is customized according to the user's requirements, and the amount of displacement does not determine the pressure.
Today, with the rapid development of science and technology, the precision and performance requirements of laboratory equipment are increasing day by day. Among them, the air compressor as a laboratory commonly used gas compression equipment, the stability of its performance and the purity of the gas quality for the accuracy of the experimental results have a crucial
In fact, we should pay attention to some principles when choosing an air compressor, so that we can compare and choose what is more suitable for us. 1, to consider the safety of compressor operation. Air compressor is a kind of machine with pressure work, work
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
