2026-04-09Views：
Q: How often is the air compressor maintained correctly?
Answer: The new screw air compressor is usually operated for 500 hours for maintenance at the beginning of installation and use;
maintenance is divided into small maintenance and large maintenance, ordinary oil injection screw air compressor small maintenance only need to replace the air compressor oil and oil filter on the line.
Grantklin's oil-free air compressor replaces the air filter element and water filter element.
Later maintenance depends on the working environment of the air compressor and determines the maintenance time. The environment is very dirty, such as a lot of dust, it is necessary to shorten this time.
The synthesis is as follows: 1. When the power is cut off and stopped, in order to prevent the compressor from starting under pressure, the power-off handle of the pressure switch should be pulled when the power is turned on again to exhaust the air in the pipeline and restart the compressor. 2. The user must set the compressor protection grounding wire to ensure the compressor
Air compressor can be used at rated flow, but the specific use of the situation also need to consider a number of factors. First of all, the rated flow of the air compressor is the gas compressed and discharged per minute under the standard state (usually the gas temperature is 20 ℃, the relative humidity is 0, and the pressure is atmospheric pressure).
The permanent magnet screw air compressor does perform well in some aspects, but there are also some potential disadvantages. The following is a detailed analysis of its advantages and disadvantages: Advantages: Excellent energy efficiency: The permanent magnet screw air compressor uses a permanent magnet motor. Compared with other types of motors, it has
The cold dryer (also known as the freeze dryer) is mainly used to remove the moisture in the compressed air. Its working principle is to use refrigeration technology to reduce the temperature of the compressed air, so that the water vapor in the compressed air is condensed into water droplets and passed through the drainage system. Discharge it. About
Analysis of cooling mode of screw air compressor: the selection of air cooling and water cooling is based on the cooling mode of screw air compressor, and the operating environment, energy efficiency requirements and maintenance costs of equipment need to be comprehensively considered. The following from the technical principles, applicable scenarios and selection recommendations of the three parties
Cold dryer exhaust high temperature alarm may be caused by a variety of reasons, the following are some possible reasons and the corresponding solutions: equipment failure: condenser blockage or cleaning is not complete: this will cause the heat can not be normal, and then trigger the high temperature alarm. Should be fixed
The drainage process of the screw air compressor can be carried out through the following steps: Manual drainage method: First, tighten the drainage valve and turn off the oil pump. Next, the pressure relief valve knob is rotated counterclockwise to relieve the pressure inside the reservoir. Open reservoir
In the air compressor market, Shanghai Grankering Group has won wide recognition for its excellent product performance and rich model specifications. Among them, its production of water lubricated screw air compressor is by virtue of its unique technical advantages, has become the first choice of many enterprises.
Permanent magnet motors do have frequency conversion and power frequency. There are significant differences in control mode, energy efficiency and operation stability between permanent magnet variable frequency motor and power frequency motor. Control mode: permanent magnet variable frequency motor is used to convert alternating current into direct current
The explosion-proof air compressor is an air compressor specially designed for use in working environments where flammable and explosive gases or dust are present. Through specific safety design and technical measures, it prevents possible internal or external explosion events and ensures that the equipment is safe in dangerous environments.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
