Air pressure of the gas used in the production workshop

The air pressure standard for the production workshop is not fixed, but is determined according to the specific application scenario and equipment requirements. The following are some common production workshop gas pressure standards and related information:

standard atmospheric pressure:

in industrial production, the commonly used standard pressure is 1 atmosphere, that is, 101.32 5千帕. This is set for convenience of measurement and comparison.

factory air compressor pressure:

in general, the air pressure of the factory air compressor is 0.8Mpa, also known as 8kg pressure. This pressure can meet the needs of most factory equipment.

However, please note that the specific value also needs to be adjusted according to user needs and equipment requirements.

Industrial gas pressure:

for plants using natural gas, the pressure of natural gas is generally controlled between 0.1 and 0.8MPa. This range can meet the needs of most industrial users, while ensuring the safe and efficient use of natural gas.

Other application scenarios:

compressed air is a common energy source in factories and is widely used in the fields of power transmission, control and mechanical operation. In the factory, the common compressed air pressure range is about 0.5 to 1.0 MPa. However, in certain industries, such as papermaking, printing, glass manufacturing, etc., the air pressure requirements are higher, and high-pressure compressed air of more than 2.0 MPa may be required.

Hydraulic oil is mainly used to drive various hydraulic equipment, and its air pressure range is related to the use scenario, generally between 3 and 10 MPa.

Nitrogen is widely used in processes and equipment in high-pressure and low-temperature environments, and its pressure range is large, ranging from 0.1 MPa to 100 MPa. The specific pressure used depends on specific application scenarios and equipment requirements.

Pressure regulation and safety protection:

the pressure standard of the plant gas supply system needs to be adjusted according to the production environment and equipment requirements. When the gas pressure required by the equipment is higher than the factory gas supply pressure standard, the gas supply system needs to be adjusted to meet the needs of the equipment.

At the same time, the equipment should have a pressure adjustment function and be able to adjust the pressure value according to actual needs. In addition, the equipment should also be equipped with safety protection devices, such as high pressure alarm, low pressure protection, etc., to prevent accidental damage to the equipment or production safety accidents.

Maintenance and management:

in order to ensure the normal operation of the gas supply system, the factory needs to carry out regular inspection and maintenance of the gas supply system. For equipment such as pressure gauges and pressure regulators, regular inspection and calibration are required.

The factory also needs to establish a corresponding management system to manage and monitor the gas supply system to ensure the stability and safety of the system.

In short, the air pressure standard of the production workshop needs to be determined according to the specific application scenario and equipment requirements. In actual operation, it is recommended to refer to the technical parameters of the equipment and production process requirements to set the appropriate air pressure value, and conduct regular maintenance and inspection to ensure the normal operation and safety of the gas supply system.