2026-04-09Views：
Application areas
in the food manufacturing and packaging industry, when the oil-injected screw compressor is used to prepare compressed gas, the performance of the lubricating oil in the compressor has been greatly reduced and acidic after many times of high-temperature oxidation and condensation emulsification in the production process. Not only can it not lubricate the subsequent equipment, but it will destroy the normal lubrication. The use of oil-free screw compressor can avoid the negative impact of invalid lubricating oil on the equipment.
In pharmaceutical and biological engineering, the pollution of bacteria and bacteriophage in compressed gas can not be ignored. The pure compressed gas provided by oil-free screw compressor can avoid the breeding of bacteria and bacteriophage in the gas.
In the electroplating industry, there are some problems in the production process, such as the surface of the coating, burning, pinhole, crack and so on. People use stirring to solve such problems, and the stirring needs the support of compressed air. The quality of compressed air has a great influence on the deposition rate and plating efficiency of bright nickel electroplating. The application of oil-free screw compressor can effectively avoid the occurrence of problems such as flower, scorch, pinhole and crack on the surface of the coating. Therefore, oil-free screw compressors have been used to prepare pure gas for electroplating.
In the automotive spray industry, impure gases often result in inferior coatings. If the compressed air contains oil, there are some scattered or concentrated small bumps on the surface of the coating. These blisters are generally produced in a coating under the topcoat, and the blisters are caused by water vapor or dirt under the coating. In addition, oily compressed air may also lead to the appearance of dot-like distribution of small potholes on the surface of the wet coating, forming crater-like silica pits, and sometimes visible substrates at the bottom of the pits, commonly known as fish eyes. Nowadays, the automobile spraying industry has begun to apply oil-free screw compressors to prepare pure gas for spraying, so that the spraying level of domestic automobiles has been improved.
In the textile industry, air-jet looms require dry and oil-free compressed air. In the production process, the fine nozzle will blow compressed air onto the wire harness to form a vortex, thereby giving the yarn shape, elasticity and elasticity. The pure compressed air provided by the oil-free screw compressor can ensure the quality of the finished cloth.
When discussing whether the oil-free screw compressor needs to be refueled, taking the water-lubricated screw air compressor products produced by the Glanklin Group as an example, we can clearly conclude that the oil-free screw compressor, especially the water Lubricated screw air compressor does not
Scroll air compressor and screw air compressor are two different kinds of compressed air generating equipment, which have significant differences in structure, working principle and application. Scroll air compressor, also known as vortex air compressor, adopts scroll design, two of which are scroll
During yeast fermentation, a certain pressure needs to be maintained in the tank. This pressure is not too high, which is probably a little higher than the external atmospheric pressure. The purpose of this is to prevent the outside bacteria and air from pouring in, while allowing the gas produced during the fermentation process to be discharged smoothly.
The air compressor power corresponding to the 37kw motor is 37kw. However, to convert it to horsepower (HP), the following calculation can be referred to: 1 horsepower (HP) is approximately equal to 0.75 kW (KW). Therefore, the 37 kW (KW) of the air compressor corresponding to the horsepower (HP) can pass 3
The main differences between the suction dryer and the cold dryer are as follows: Working principle: The suction dryer: The moisture in the compressed air is adsorbed by the adsorbent (such as silica gel, activated alumina, etc.) to achieve the drying effect. When the adsorbent is saturated, it needs to be regenerated.
The size of the air compressor used in the factory depends on many factors, such as the size of the factory, the number of production lines, and the demand for equipment. Generally speaking, small and medium-sized factories may only need smaller air compressors, while large factories may need several large air compressors to meet production.
Compressed gas is used in the machining industry, and its application runs through many key production links, which plays an important role in improving efficiency, ensuring accuracy and realizing automatic control. The following is a systematic description of the application scenario, equipment sources and advantages: 1. compressed gas
For 55m & sup3;/min air compressor demand, when selecting the size of the air compressor, many factors need to be considered, including gas volume, pressure, power, etc. However, due to the variety of models and specifications of air compressors, and the power of air compressors of different brands and models under the same gas volume
In the field of environmental protection, air compressors play an important role in many links and scenes. The following are some typical environmental protection applications using air compressors: Sewage treatment: In the sewage treatment process, air compressors are often used to provide gas to increase the oxygen content. This helps fine
When the flow rate (exhaust volume) and pressure (exhaust pressure) of the air compressor are known, the power can be calculated by the following formula: power (kW)= 367 exhaust pressure (bar)× exhaust flow rate (m & sup3;/min) or the specific power formula (input power needs to be known
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
