2026-04-09Views：
Oil-free air compressor has the advantages of low failure rate, high quality air compressor and stable product performance. In order to ensure its work efficiency and equipment service life, the following points should be paid attention to when using:
1. When using an oil-free air compressor, a compressor protection grounding wire must be set to ensure that all metal shells of the compressor are in good contact with the earth, and the grounding resistance should meet national standards.
2. Keep the workplace environment clean and tidy: messy disorder is more likely to cause accidents.
3. Pay attention to the environment in the working environment: the oil-free air compressor must not be hit by wind and rain. If you cannot work in humid air or dark places, do not store flammable and explosive liquid carbon dioxide gas and work in places with excessive dust.
4. Be sure to take good care of the machine: For the oil-free air compressor that is not selected, the air and sewage in the air storage tank should be released and stored in a relatively dry environment.
5. Do not force the choice of machine performance: operate according to the voltage and current, response speed or load current calibrated on the oil-free air compressor.
6. Beware of electric shock: When choosing an oil-free air compressor, please do not let your body touch grounded objects (such as catheters, heating pipes, refrigerators, etc.)
7. outsiders/children do not approach: do not let irrelevant personnel near the oil-free air compressor, so as to avoid injury and electric shock.
8. The air compressor is an oil-free air compressor. The friction parts are lubricated by water. Do not add lubricating oil.
9. When the air compressor finds serious air leakage, abnormal noise and peculiar smell, it should stop running immediately, and it can run again after finding out the cause and troubleshooting.
10. Power supply voltage: It should be noted that the power supply voltage is consistent with the voltage and current marked on the oil-free air compressor. When the power supply voltage is higher than the applicable voltage and current of the air compressor, it is likely to cause an accident and damage the air compressor. When the power supply voltage is lower than the applicable voltage and current of the air compressor, it will cause abnormal startup. Even damage to the motor.
11. Can cut off the power supply in time: when not in use after work, develop the habit of cutting off the power supply in time.
There are significant differences between permanent magnet frequency conversion and power frequency air compressor in terms of working principle, efficiency, noise and energy saving. The following are the specific differences between the two and the power saving advantages of the permanent magnet variable frequency air compressor: 1. The difference between permanent magnet variable frequency and power frequency: Working principle: permanent magnet variable frequency
The pressure setting of the air compressor needs to be determined according to the specific application scenario to achieve the best effect. Generally speaking, the pressure range of the air compressor at work is relatively wide, ranging from low pressure to high pressure. In common use scenarios, the working pressure of the air compressor is usually set.
In a humid environment, the moisture problem generated by the air compressor will be significantly aggravated, which may lead to equipment corrosion, lubricating oil emulsification, and compressed air quality degradation, thereby affecting production efficiency and product quality. The following is a systematic solution, covering prevention, treatment and optimization measures
Oil-free air compressors generally do not belong to special equipment. Special equipment refers to those with high risk, if the accident may pose a significant threat to personal and property safety equipment, such as boilers, pressure vessels, pressure pipes, elevators, lifting machinery
The power range of water lubricated air compressor is usually 7.5-250KW. This power range can meet application scenarios of different sizes and needs, from small industrial equipment to large production lines, where suitable water-lubricated air compressors can be found. About Hagrid
Air compressor blowing out of the gas containing moisture is a relatively common problem, which may be due to a variety of reasons. In order to solve this problem, the following measures can be taken: 1. check and maintain the drainage system to discharge condensate regularly: in the air compressor's gas storage
Oil-free air compressor Oil-free air compressor, as the name suggests, does not require lubricating oil for lubrication and cooling during its operation. This design brings several significant advantages: High cleanliness: Since there is no lubricating oil involved in the compression process, the output air is purer
There is a close relationship between air compressor and gas consumption. The main function of the air compressor is to compress and provide air, so its performance directly affects the air consumption. Specifically, the displacement of the air compressor (that is, the discharge per unit time, converted to the suction state
The choice of air pressure and flow should be judged according to the specific application scenario, equipment requirements and economy, not the bigger the better or the smaller the better. The following is a detailed analysis: the core function of 1. air pressure and flow pressure (pressure) definition: the pressure of compressed air, the unit is MP
Drainage from the air compressor room should be discharged to a suitable sewage pipe or sewage treatment facility. This is to ensure that the drainage complies with local environmental regulations and to prevent pollution to the environment. Specifically, drainage pipes need to be designed in accordance with the specification requirements, including drainage
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
