2026-04-09Views：
Q: Does the water-lubricated oil-free screw air compressor have a belt?
Answer: Yes.
The "water-lubricated oil-free screw air compressor" produced by Shanghai granklin (group) 7.5 kW two kinds of motor direct connection and belt drive. We still use direct connection scheme for high power air compressor.
In industrial production, air compressor as an important power equipment, its stable operation is directly related to production efficiency and product quality. However, air compressors often encounter the problem of jet water during use, which will not only affect the purity of compressed air, but also
The maximum working pressure of the air pressure pipeline shall be comprehensively determined according to the pipeline material, design standards and actual use scenarios, and the core is to ensure the safety of gas supply and equipment stability. 1. Pressure range for common industrial scenarios Design Highest Work for Air Pressure Piping for General Industrial Use
Air compressors are needed in the process of waste incineration. Waste incineration usually requires the cooperation of multiple systems, including waste treatment system, combustion system, flue gas purification system and auxiliary system. In these systems, the air compressor may be used as a device.
To judge whether the screw machine is frequency conversion or power frequency, you can observe and judge from the following aspects: control panel and display screen: frequency conversion screw machine is usually equipped with advanced control panel and display screen, which can display the current operating frequency, pressure, Temperature etc.
In the textile industry, air compressor as one of the key power equipment, the stability of its performance and the accuracy of pressure output have a crucial impact on production efficiency and product quality. This article will focus on "How much pressure is the air compressor in the textile industry"
Oil-free air compressors are designed to avoid the use of oil in the compression process, but in practice it may be found that the compressed gas still contains oil. This is mainly caused by the following reasons: the oil contained in the air itself: naturally occurring in the air
Q: air consumption of equipment and air compressor selection? Answer: according to the air consumption of equipment to choose air compressor first consider two points: 1, the pressure problem, need to understand the normal use of all equipment pressure range, take the maximum and minimum, and then according to the maximum increase of 1kg pressure to select the air compressor.
Air compressors with oil and without oil are not absolutely good or bad. Their use occasions are different from those suitable for working conditions. If they are used for purging, machining, manufacturing and power, it is OK to choose air compressors with oil and slight oil, but in some occasions, oil-free air must be used.
The unit of oil removal from air compressors is usually "PPM" (parts per million) or "mg/m & sup3;" (milligrams per cubic meter), which is used to measure the residual oil content in compressed air. The following are specific instructions: 1. PPM (parts per million) Definition: PP
Yes, the air compressor is mainly used to provide compressed air. Air compressor is the abbreviation of air compressor. It is a device that converts the mechanical energy of the driving force (usually an electric motor or an internal combustion engine) into gas pressure energy. It is a pressure generating device for compressed air. By
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
