The start-up process of the air compressor usually includes the preparation before starting, the start-up operation and the inspection after starting. At the same time, some key matters need to be paid attention to to ensure the normal operation and safe use of the air compressor. The following is the detailed boot process and precautions:
1. boot process
1. Preparation before starting
- check lubricating oil level: Ensure that the oil level is within the normal range to avoid problems caused by too high or too low oil level.
- Check belt and fastening bolts: Ensure that the belt tightness is moderate and the fastening bolts are not loose.
- Open gas cylinder inlet valve: Ensure that the gas can enter the air compressor smoothly.
- Check motor rotation direction: Ensure that the motor rotates in the correct direction to avoid damage caused by reverse rotation.
- Check power supply and wiring: Ensure that the power supply voltage is stable and the line connection is correct.
- Other Preparations for water-cooled units, it is also necessary to check whether the cooling water circulation system is normal; for air compressors that have been shut down for a long time, it is recommended to run inching to check whether the operation and sound are normal.
2. Start operation
- power on: Connect the air compressor to the power supply and prepare to start.
- Start the air compressor: Press the start button or ON button to start the air compressor. For air compressors with automatic control function, the button switch can be placed in the "automatic" position to allow the air compressor to run automatically under the control of the pressure controller.
- Observe operating parameters during the operation of the air compressor, observe whether the parameters on the control panel are normal, such as pressure, temperature, current, etc.
3. Check after startup
- check operation data: Ensure that the operating data of the air compressor is within the normal range, such as pressure, temperature, etc.
- Check machine sound and vibration: Listen to whether the sound of the machine is normal and observe whether there is abnormal vibration.
- Check safety valve and reservoir: Ensure that the safety valve and gas storage tank work normally without leakage.
2. considerations
- no unauthorized operation trainees or untrained personnel are strictly prohibited to operate the air compressor without permission, and should be carried out under the guidance and supervision of the instructor.
- Regular maintenance and maintenance: Regularly maintain and maintain the air compressor, such as replacing lubricating oil, cleaning filters, etc., to ensure its normal operation and extend its service life.
- Pay attention to safety when operating the air compressor, pay attention to safety matters, such as wearing protective equipment and avoiding touching rotating parts.
- Emergency stop: During the operation of the air compressor, if an abnormal situation or emergency is found, the emergency stop button should be pressed immediately to stop the machine.
- Long-term out of service: For air compressors that have been out of service for a long time, they should be regularly energized and moisture-proof, and they should be continuously energized for two hours to maintain stable performance.
To sum up, the start-up process of the air compressor includes the preparation before starting, the start-up operation and the inspection after starting. At the same time, some key matters need to be paid attention to to ensure the normal operation and safe use of the air compressor.
